Print Back

Wave spring washers are normally used in thrust-loading applications for small deflections, particularly where radial space is limited. A typical example is the axial loading of ball bearings. The spring rate is approximately linear between 20% and 80% of available deflection.Certificate of compliance available upon request - Certificate of chemical analysis available at extra cost.

Stainless Steel - Commercial Type 302 & Government AMS 5906 (Chemical only) - Type 302

High Carbon Steel - Commercial 1074-1095– Certified to ASTM-A684 & Commercial 1074– Certified to ASTM-A684

Finish - Washers are carried in stock in plain finish suitable for various types of finishes: either electroplated or mechanically plated (a process which reduces the possibility of hydrogen embrittlement). Please call us for recommendations on special or specific applications.

Unit of Measure

Specifications

Weight

0.007420 pounds

Material

C1074 ASTM A684

Height

1.819 inches

Depth

0.125 inches

Width

0.125 inches

Country of Origin

US

Thickness (In.)

0.0200 Inch

Free Height (Approx) (In.)

0.125 Inch

Nominal Spring Rate (lbs/In.)

476 lbs/in

Inside Diameter (In.)

1.404 Inch

Outside Diameter (In.)

1.819 Inch

# of Waves

3

Warning

Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.