Print Back

Precision engineered curved washers are available from in many stock sizes. These washers are made of finely tempered spring steel with some sizes being made of stainless steel. They come deburred and we have had all set removed during manufacture. Curved washers exert relatively light thrust loads and are often used to absorb axial end play. The rate is approximately linear between 10% and 80% of available deflection. Certificate of compliance available upon request - Certificate of chemical analysis available at extra cost.

Finish- Standard finish for high carbon steel is plain finish. Stainless steel is supplied in plain finish. On special order, high carbon steel washers may be mechanically plated, a process which substantially reduces the possibility of hydrogen embrittlement. Recommendations for specific applications will be made on request.

Material - Stainless Steel (Parts with suffix ā€œSā€) Commercial - Type 301 per ASTM-A666 (chemical only) & High Carbon Steel Commercial - 1074-1095 per ASTM-A684

Unit of Measure

Specifications

Weight

N/A 0.000390 Pound

Material

N/A 301 Stainless Steel (Commercial), ASTM-A666 (Chemical)

Height

N/A 0.500 Inch

Depth

N/A 0.091 Inch

Width

N/A 0.091 Inch

Country of Origin

N/A US

Minimum ID (In.)

N/A 0.265 Inch

Maximum OD (In.)

N/A 0.490 Inch

Thickness (In.)

N/A 0.0075 Inch

Free Height (Approx) (In.)

N/A 0.091 Inch

Nominal Spring Rate (lbs/In.)

N/A 78 lbs/in

Loaded Height (In.)

N/A 0.046 Inch

Warning

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.