Print Back

Loose Joint Hinges, variably referred to as slip, separable or take-apart hinges, have always been catalogued as right or left hand hinges. Because applications may vary, this has caused errors in in specification as to which is right or left hand. To simplify the selection of all loose joint hinges, we have identified each hinge by type and illustrated them in some detail. These hinges may be modified by hole piercing, swaging, forms and finishes. Refer to Special Hinge Guide. Other gauges, widths, lengths, and pin materials can be made to order.

This section contains the sizes and numbers of loose joint hinges which are considered standard and are usually carried in stock. These are surface type blank hinges without holes and less finish. They have spun or loose pins of similar material.

Other gauges, widths, lengths, and pin materials can be made to order. Prices based on quantity of order are available upon request. NO MINIMUM quantity required, any order acceptable.

For more information on loose joint hinges, please see: The Benefits of Loose Joint Hinges, Standard Hinges vs Loose Joint Hinges: What’s the Difference? and What Are Loose Joint Hinges?

Steel Mortise Type E Loose Hinge
Unit of Measure
Items Steel Mortise Type E Loose Hinge
LJH1163-S
Steel Mortise Type E Loose Hinge
Steel Mortise Type E Loose Hinge
LJH1167-S
Steel Mortise Type E Loose Hinge
Steel Mortise Type E Loose Hinge
LJH1171-S
Steel Mortise Type E Loose Hinge
Steel Mortise Type E Loose Hinge
LJH1175-S
Steel Mortise Type E Loose Hinge
Steel Mortise Type E Loose Hinge
LJH1139-S
Steel Mortise Type E Loose Hinge
Length N/A 1.50 in N/A 1.50 in N/A 2.00 in N/A 2.50 in N/A 2.00 in
Type N/A E
Gauge N/A 0.048 in N/A 0.048 in N/A 0.048 in N/A 0.048 in N/A 0.06 in
Open Width N/A 1.00 in N/A 1.25 in N/A 1.50 in N/A 1.50 in N/A 1.25 in
Pin Diameter N/A 0.125 in
Material/Type N/A Steel - Mortise Type
Hinge Leaf Material N/A Cold Rolled Steel
Hinge Pin Material N/A Steel