Print Back

These value oriented levelers are built for a wide range of applications, from conveyor lines to production machinery. Corrosion resistant glass fiber reinforced nylon base is attractive, yet very durable. Base diameters available from 2 inches to 5 inches.

    Features:
  • 15 degree tilt off centerline allows for mounting on uneven surfaces
  • Studs are made of either low carbon steel with clear zinc finish or 300 grade stainless steel
  • All stud styles come with matching lock nut
  • Glass fiber nylon base
  • Available with or without non-skid elastomer pad
  • "Pop out" lag holes allow for mounting the base to the floor
  • Tapped nut style also available for those applications where a mounting stud already exists

Polymounts - Stud Style
Unit of Measure
Items Polymounts - Stud Style
LP-4011
Polymounts - Stud Style - Non-Skid Pad
Polymounts - Stud Style
LP-4012
Polymounts - Stud Style - Non-Skid Pad
Polymounts - Stud Style
LP-4013
Polymounts - Stud Style - Non-Skid Pad
Polymounts - Stud Style
LP-4014
Polymounts - Stud Style - Non-Skid Pad
Polymounts - Stud Style
LP-4015
Polymounts - Stud Style - Non-Skid Pad
Material N/A Steel
A - Thread Size N/A 3/8-16 N/A 1/2-13 N/A 1/2-13 N/A 5/8-11 N/A 5/8-11
E - Hex Size N/A 3/4 in N/A 3/4 in N/A 3/4 in N/A 0.88 in N/A 0.88 in
C - Bolt / Thread Length N/A 4.00 in N/A 4.00 in N/A 4.00 in N/A 4.00 in N/A 6.00 in
Load (Max.) N/A 4000 lb N/A 4000 lb N/A 5000 lb N/A 5000 lb N/A 6000 lb
D - Total Height N/A 5.19 in N/A 5.19 in N/A 5.19 in N/A 5.19 in N/A 7.38 in
Max Load N/A 4000 lbs (1814 kg) N/A 4000 lbs (1814 kg) N/A 5000 lbs (2268 kg) N/A 5000 lbs (2268 kg) N/A 6000 lbs (2722 kg)
Stud Length N/A 4.00 in (102 mm) N/A 4.00 in (102 mm) N/A 4.00 in (102 mm) N/A 4.00 in (102 mm) N/A 6.00 in (152 mm)
PS - Insert N/A Stud