Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
| Items |
 M65367 Non-Locking Style - Steel - Inch |
M65381 Non-Locking Style - Steel - Inch |
M65392 Non-Locking Style - Steel - Inch |
M65405 Non-Locking Style - Steel - Inch |
M65412 Non-Locking Style - Steel - Inch |
|||||
| Material | Steel | |||||||||
| Style | A | A | A | A | B | |||||
| L | 47.00 mm | 56.00 mm | 74.00 mm | 80.00 mm | 47.00 mm | |||||
| D | 5.00 mm | 6.00 mm | 8.00 mm | 10.00 mm | 5.00 mm | |||||
| H | 5.00 mm | 6.00 mm | 8.00 mm | 10 mm | 5.00 mm | |||||
| D2 | 21.00 mm | 25.00 mm | 33.00 mm | 33.00 mm | 21.00 mm | |||||
| L2 | 7.00 mm | 8.00 mm | 10.00 mm | 12.00 mm | 7.00 mm | |||||
| L3 | 15.00 mm | 17.00 mm | 23.00 mm | 25.00 mm | 15.00 mm | |||||
| L1 | 17.00 mm | 20.00 mm | 26.00 mm | 28.00 mm | 17.00 mm | |||||
| D1 | 3/8-16 in | 1/2-13 in | 5/8-11 in | 3/4-10 in | 3/8-16 in | |||||
| F x 30° | 1.30 mm | 1.80 mm | 2.30 mm | 2.80 mm | 1.30 mm | |||||
| F1 - Spring Force Initial Pressure | 5 N | 6 N | 15 N | 15 N | 5 N | |||||
| F2 - Spring Force Final Pressure | 12 N | 14 N | 35 N | 34 N | 12 N | |||||
| SW1 | 13.00 mm | 14.00 mm | 19.00 mm | 22.00 mm | 13.00 mm | |||||
| SW2 | 9/16 in | |||||||||
|
|
||||||||||
