Material:
Key ring 1.4310, natural finish
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been disengaged.The key ring is also suitable for actuation of the locking bolt, for example automatically (programme-controlled) with the aid of a pneumatic cylinder or actuation by remote control with bowden cables.
On request:
Special versions and spacer rings.
| Items |
 M65564 Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric |
M65565 Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric |
M65566 Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric |
M65567 Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric |
M65568 Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric |
|||||
| Material | Steel | |||||||||
| Style | R | |||||||||
| D | 4.00 mm | 5.00 mm | 6.00 mm | 8.00 mm | 10.00 mm | |||||
| H | 4.00 mm | 5.00 mm | 6.00 mm | 8.00 mm | 10 mm | |||||
| D4 | 15.00 mm | 23.00 mm | 23.00 mm | 28.00 mm | 28.00 mm | |||||
| L2 | 6.00 mm | 7.00 mm | 8.00 mm | 10.00 mm | 12.00 mm | |||||
| L1 | 15.00 mm | 17.00 mm | 20.00 mm | 26.00 mm | 28.00 mm | |||||
| D1 | M8 X 1.00 mm | M10 X 1.00 mm | M12 X 1.50 mm | M16 X 1.50 mm | M20 X 1.50 mm | |||||
| F x 30° | 1.00 mm | 1.30 mm | 1.80 mm | 2.30 mm | 2.80 mm | |||||
| F1 - Spring Force Initial Pressure | 6 N | 5 N | 6 N | 15 N | 15 N | |||||
| F2 - Spring Force Final Pressure | 12 N | 12 N | 14 N | 35 N | 34 N | |||||
| L4 | 13.00 mm | 15.00 mm | 17.00 mm | 23.00 mm | 25.00 mm | |||||
| SW1 | 10.00 mm | 13.00 mm | 14.00 mm | 19.00 mm | 22.00 mm | |||||
| SW2 | ||||||||||
| End Pressure Initial-Final | ||||||||||
|
|
||||||||||
