Print Back

Material:

  • Steel version, locking pin hardened: quality class 5.8
  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
  • Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

    Mushroom knob in anthracite gray thermoplastic

    Surface finish:

  • Steel version, locking pin hardened: black oxide finish, locking pin ground
  • Stainless steel version, locking pin hardened: natural finish, locking pin ground
  • Stainless steel version, locking pin not hardened: natural finish, locking pin ground

    Note:
    Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.

    (Kipp Original Design)
  • Indexing Plunger with Pull Handle and Cap - Locking Pin Hardened - Stainless Steel - Metric
    Indexing Plunger with Pull Handle and Cap - Locking Pin Hardened - Stainless Steel - Metric
    Unit of Measure
    Items Indexing Plunger with Pull Handle and Cap - Locking Pin Hardened - Stainless Steel - Metric
    M65368
    Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric
    Indexing Plunger with Pull Handle and Cap - Locking Pin Hardened - Stainless Steel - Metric
    M65372
    Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric
    Indexing Plunger with Pull Handle and Cap - Locking Pin Hardened - Stainless Steel - Metric
    M65374
    Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric
    Indexing Plunger with Pull Handle and Cap - Locking Pin Hardened - Stainless Steel - Metric
    M65376
    Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric
    Indexing Plunger with Pull Handle and Cap - Locking Pin Hardened - Stainless Steel - Metric
    M65378
    Indexing Plunger with Pull Handle and Cap - Locking Pin Not Hardened - Stainless Steel - Metric
    Material N/A Stainless Steel
    Style N/A A
    L N/A 47.00 mm N/A 47.00 mm N/A 56.00 mm N/A 74.00 mm N/A 80.00 mm
    D N/A 5.00 mm N/A 5.00 mm N/A 6.00 mm N/A 8.00 mm N/A 10.00 mm
    H N/A 5.00 mm N/A 5.00 mm N/A 6.00 mm N/A 8.00 mm N/A 10 mm
    D2 N/A 21.00 mm N/A 21.00 mm N/A 25.00 mm N/A 33.00 mm N/A 33.00 mm
    L2 N/A 7.00 mm N/A 7.00 mm N/A 8.00 mm N/A 10.00 mm N/A 12.00 mm
    L3 N/A 15.00 mm N/A 15.00 mm N/A 17.00 mm N/A 23.00 mm N/A 25.00 mm
    L1 N/A 17.00 mm N/A 17.00 mm N/A 20.00 mm N/A 26.00 mm N/A 28.00 mm
    Note N/A
    D1 N/A 3/8-16 in N/A 3/8-24 in N/A 1/2-13 in N/A 5/8-11 in N/A 3/4-10 in
    F x 30° N/A 1.30 mm N/A 1.30 mm N/A 1.80 mm N/A 2.30 mm N/A 2.80 mm
    F1 - Spring Force Initial Pressure N/A 5 N N/A 5 N N/A 6 N N/A 15 N N/A 15 N
    F2 - Spring Force Final Pressure N/A 12 N N/A 12 N N/A 14 N N/A 35 N N/A 34 N
    SW1 N/A 13.00 mm N/A 13.00 mm N/A 14.00 mm N/A 19.00 mm N/A 22.00 mm
    SW2 N/A
    End Pressure Initial-Final N/A