Vibro-Leveler Machine Mount | OneMonroe

OneMonroe
Locations Throughout the Country
ISO 9001:2015
Tel: (877) 740-2007
Fax: (800) 453-9683
Email: sales@askmonroe.com
Website: monroeengineering.com

Print Back

Simple in design and construction, each Vibro Leveler has an inner cylinder with attached stud. These are insulated from the outer shell by a wall of mechanically bonded rubber.

Features:

Install Quickly and Easily
Require No Special Parts or Maintenance
Come Complete, Require No Tapping or Fitting
Protect Machineryfrom Damaging Effects of Vibration and Shock

Vibro-Leveler Machine Mount

Vibro-Leveler Machine Mount

Unit of Measure

Items	MM10-10 Vibro-Leveler Machine Mount	MM10-25 Vibro-Leveler Machine Mount	MM10-50 Vibro-Leveler Machine Mount	MM10-100 Vibro-Leveler Machine Mount	MM10-200 Vibro-Leveler Machine Mount
Load Capacity of Each Mounting	N/A 10 lbs	N/A 25 lbs	N/A 50 lbs	N/A 100 lbs	N/A 200 lbs
Max. (Avg) Deflection Under Rated Load	N/A 0.0625
A - Height Floor to Top of Nut Min. Ht Above Floor	N/A 1.13 in	N/A 1.63 in	N/A 1.63 in	N/A 1.75 in	N/A 2.25 in
B - Height (O.A.) Mount Including Stud	N/A 2.13 in	N/A 2.75 in	N/A 2.75 in	N/A 3.00 in	N/A 3.75 in
C - Height of Stud Above Lower Nut	N/A 1.00 in	N/A 1.00 in	N/A 1.00 in	N/A 1.13 in	N/A 1.38 in
D - Diamter of Stud	N/A 5/16 in	N/A 3/8 in	N/A 3/8 in	N/A 3/8 in	N/A 1/2 in
E - Diameter of Housing	N/A 1.25 in	N/A 1.25 in	N/A 1.25 in	N/A 1.50 in	N/A 1.75 in
F - Bolt Hole Center	N/A 1.88 in	N/A 1.88 in	N/A 1.88 in	N/A 2.44 in	N/A 2.75 in
G - Diamtere of Base	N/A 2.50 in	N/A 2.50 in	N/A 2.50 in	N/A 3.00 in	N/A 3.50 in
H - Flange Height	N/A 0.17 in
I - Diameter of Bolt Holes in Base	N/A 0.25 in	N/A 0.25 in	N/A 0.25 in	N/A 0.31 in	N/A 0.38 in
J - Height of Body Above Flange	N/A 0.56 in	N/A 1.00 in	N/A 1.00 in	N/A 1.13 in	N/A 1.50 in