Wave spring washers are normally used in thrust-loading applications for small deflections, particularly where radial space is limited. A typical example is the axial loading of ball bearings. The spring rate is approximately linear between 20% and 80% of available deflection.Certificate of compliance available upon request - Certificate of chemical analysis available at extra cost.

Stainless Steel - Commercial Type 302 & Government AMS 5906 (Chemical only) - Type 302

High Carbon Steel - Commercial 1074-1095– Certified to ASTM-A684 & Commercial 1074– Certified to ASTM-A684

Finish - Washers are carried in stock in plain finish suitable for various types of finishes: either electroplated or mechanically plated (a process which reduces the possibility of hydrogen embrittlement). Please call us for recommendations on special or specific applications.

Unit of Measure

Weight

0.000191 pounds

Material

302 Stainless Steel (Commercial) AMS 5906 (Chemical)

Height

0.484 inches

Depth

0.029 inches

Width

0.029 inches

Country of Origin

US

Thickness (In.)

0.0090 Inch

Free Height (Approx) (In.)

0.029 Inch

Nominal Spring Rate (lbs/In.)

444 lbs/in

Inside Diameter (In.)

0.397 Inch

Outside Diameter (In.)

0.484 Inch

# of Waves

3

Warning

Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.