SolaDeck Model 0786-3R (AC/DC Pass thru) 2 Position ground block UL50 Type 3R, CSA C22.2 No.94-M91

The SolaDeck UL 50 Type 3R Enclosures are most commonly used to pass through or transition outdoor system wiring to interior house wiring with a weather-tight enclosure.

SolaDeck 0786-3R Details:
- 6" Din rail installed
- ETL listed and labeled to the UL50 3R Standard
- Residential pass through or wire transition
- Use Rail Mount 1450 or 1451 terminal blocks for clean wire transition (sold separately)

SolaDeck is a PV wire enclosure and seamless flashed product all in one. SolaDeck eliminates the multiple parts and respective labor typically needed to accomplish the roof penetration for a weather-tight wiring passageway into the home.

Unique in the solar industry, SolaDeck is designed with a seamless flashing consistent with standard roofing practices for roof penetration. All SolaDeck models are third party tested by ETL to the UL50 Type 3R or UL1741 standards. NOTE: SolaDeck enclosures include din rail, ground blocks, and aluminum strain clip. All other internal parts are sold separately  - check out the SolaDeck components list below for more info.

All SolaDeck Enclosures Feature:
- 18 gauge galvanized steel Powder coated finish
- Seamless stamped construction
- Three roof deck knockouts (½"e;, ¾"e;, 1")
- Five center points for entry or exit
- Two or five position ground block
- Flashes in the roof system
- Mounting hardware included
- Listed to respective UL standards (UL50 Type 3R or UL1741)

Technical Documents:
Soladeck_Manual
SolaDeck Components List

Unit of Measure