L-Handle Indexing Plunger - Metric

Material:
-Steel quality class 5.8

Surface finish:
-Blue chromated

Note:
-Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.

On request:
Special versions.

(Kipp Original Design)

Request Information

Unit of Measure

Items	M65439 L-Handle Indexing Plunger - Metric	M65447 L-Handle Indexing Plunger - Metric	M65441 L-Handle Indexing Plunger - Metric	M65443 L-Handle Indexing Plunger - Metric	M65445 L-Handle Indexing Plunger - Metric
Finish	N/A Steel Blue Chromate
L	N/A 41.50 in	N/A 54.00 in	N/A 65.00 in	N/A 73.00 in	N/A 103.00 in
A	N/A 16.00 in	N/A 19.00 in	N/A 23.00 in	N/A 31.00 in	N/A 33.00 in
D	N/A 4.00 in	N/A 5.00 in	N/A 6.00 in	N/A 8.00 in	N/A 10.00 in
H	N/A 10.00 in	N/A 12.00 in	N/A 14.00 in	N/A 19.00 in	N/A 25.00 in
D2	N/A 2.30 in	N/A 3.00 in	N/A 3.50 in	N/A 4.70 in	N/A 4.70 in
L2	N/A 12.00 in	N/A 15.00 in	N/A 18.00 in	N/A 22.00 in	N/A 27.00 in
L3	N/A 17.00 in	N/A 24.00 in	N/A 30.00 in	N/A 28.00 in	N/A 45.00 in
L1	N/A 20.00 in	N/A 27.00 in	N/A 34.00 in	N/A 32.00 in	N/A 51.00 in
D1	N/A M6 mm	N/A M8 mm	N/A M10 mm	N/A M12 mm	N/A M16 mm
F x 30°	N/A 0.70 in	N/A 0.90 in	N/A 1.10 in	N/A 1.30 in	N/A 1.60 in
F1 - Spring Force Initial Pressure	N/A 3 N	N/A 3.5 N	N/A 4 N	N/A 4 N	N/A 4 N
F2 - Spring Force Final Pressure	N/A 10 N	N/A 13.5 N	N/A 16 N	N/A 22 N	N/A 23 N
SW1	N/A 6.00 in	N/A 8.00 in	N/A 10.00 in	N/A 12.00 in	N/A 16.00 in
Tightening Torque Max.	N/A 1.6 nm	N/A 4.5 nm	N/A 10 nm	N/A 13 nm	N/A 42 nm