L-Handle Indexing Plunger - Inch

Features:

Material:Steel quality class 5.8
Surface finish:Blue chromated

Note: Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.

On request: Special versions.

(Kipp Original Design)

Request Information

Unit of Measure

Items	M65440 L-Handle Indexing Plunger - Inch	M65442 L-Handle Indexing Plunger - Inch	M65444 L-Handle Indexing Plunger - Inch	M65446 L-Handle Indexing Plunger - Inch
Finish	N/A Steel Blue Chromate
L	N/A 1.63 in	N/A 2.56 in	N/A 2.87 in	N/A 4.05 in
A	N/A 0.61 in	N/A 0.92 in	N/A 1.23 in	N/A 1.29 in
D	N/A 0.16 in	N/A 0.25 in	N/A 0.31 in	N/A 0.38 in
H	N/A 0.37 in	N/A 0.56 in	N/A 0.75 in	N/A 1 in
D2	N/A 0.09 in	N/A 0.14 in	N/A 0.19 in	N/A 0.19 in
L2	N/A 0.47 in	N/A 0.69 in	N/A 0.87 in	N/A 1.06 in
L3	N/A 0.63 in	N/A 1.06 in	N/A 1.13 in	N/A 1.75 in
L1	N/A 0.79 in	N/A 1.31 in	N/A 1.25 in	N/A 1.99 in
D1	N/A 1/4-20 in	N/A 3/8-16 in	N/A 1/2-13 in	N/A 5/8-11 in
F x 30°	N/A 0.70 in	N/A 1.10 in	N/A 1.30 in	N/A 1.60 in
F1 - Spring Force Initial Pressure	N/A 3 N	N/A 4 N	N/A 4 N	N/A 4 N
F2 - Spring Force Final Pressure	N/A 10 N	N/A 16 N	N/A 22 N	N/A 23 N
SW1	N/A 0.25 in	N/A 0.38 in	N/A 0.50 in	N/A 0.63 in
Tightening Torque Max.	N/A 1.6 nm	N/A 10 nm	N/A 13 nm	N/A 42 nm