Indexing Plunger with Exted Pin

Material:

Steel version, locking pin hardened: quality class 5.8

Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034

Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

Mushroom knob in anthracite gray thermoplastic

Surface finish:

Steel version, locking pin hardened: black oxide finish, locking pin ground

Stainless steel version, locking pin hardened: natural finish, locking pin ground

Stainless steel version, locking pin not hardened: natural finish, locking pin ground

Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.

(Kipp Original Design)

Request Information

Unit of Measure

Items	M65737 Indexing Plunger with Exted Pin - No Collar - Locking Pin Hardned - Steel - Inch	M65689 Indexing Plunger with Exted Pin - No Collar - Locking Pin Hardned - Steel - Inch	M65695 Indexing Plunger with Exted Pin - No Collar - Locking Pin Hardned - Steel - Inch	M65713 Indexing Plunger with Exted Pin - No Collar - Locking Pin Hardned - Steel - Inch	M65729 Indexing Plunger with Exted Pin - No Collar - Locking Pin Hardned - Steel - Inch
Material	N/A Steel
Style	N/A G
L	N/A 33.00 mm	N/A 40.50 mm	N/A 46.50 mm	N/A 54.70 mm	N/A 72.00 mm
D	N/A 3.00 mm	N/A 4.00 mm	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm
H	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm	N/A 9 mm	N/A 12 mm
D2	N/A 14.00 mm	N/A 18.00 mm	N/A 21.00 mm	N/A 25.00 mm	N/A 33.00 mm
L2	N/A 11.00 mm	N/A 13.50 mm	N/A 13.50 mm	N/A 13.50 mm	N/A 24.00 mm
L1	N/A 17.00 mm	N/A 21.00 mm	N/A 24.00 mm	N/A 28.00 mm	N/A 36.00 mm
D1	N/A 1/4-28 in	N/A 5/16-24 in	N/A 3/8-24 in	N/A 1/2-13 in	N/A 5/8-11 in
F x 30°	N/A 0.80 mm	N/A 1.00 mm	N/A 1.30 mm	N/A 1.80 mm	N/A 2.30 mm
F1 - Spring Force Initial Pressure	N/A 4.5 N	N/A 6 N	N/A 5 N	N/A 6 N	N/A 15 N
F2 - Spring Force Final Pressure	N/A 11 N	N/A 15 N	N/A 16 N	N/A 18 N	N/A 45 N
SW	N/A
End Pressure Initial-Final	N/A