Material:

  • Steel version: pressure foot in tempered steel. Ball element in case-hardened free-cutting steel
  • Stainless steel version: pressure foot and ball element in stainless steel
  • Surface finish:

  • Steel version: pressure foot black oxide finish. Ball element in case-hardened; black oxide finish
  • Stainless steel version: natural finish
  • Damper plate PUR elastomere, gray, fixed, cannot slip. range of use from -30 °C to +70 °C. Damper plate PUR elastomere (Sylomer V12).

    Note: The manageable load given in the table is a recommendation of the permanent static load up to which the absorption unit should be used. This static load corresponds to a pressure per area of 0.4 N/mm², at which the material reaches its optimum absorption properties. Here it is taken into account that under dynamic demands an additional load, up to 0.6 N/mm² may occur. The damper plate absorbs vibrations and prevents slipping of the Swivel Foot. Swivel Foot (without vibration absorption) see 07144. This is a Kipp Original Design.

    Unit of Measure
    Items
    Leveling Pads with Vibration Absorption - Inch

    Leveling Pads with Vibration Absorption - Metric

    Leveling Pads with Vibration Absorption - Inch

    Leveling Pads with Vibration Absorption - Metric

    Leveling Pads with Vibration Absorption - Inch

    Leveling Pads with Vibration Absorption - Metric

    Leveling Pads with Vibration Absorption - Inch

    Leveling Pads with Vibration Absorption - Metric

    Leveling Pads with Vibration Absorption - Inch

    Leveling Pads with Vibration Absorption - Metric
    Material N/A Steel N/A Steel N/A Steel N/A Steel N/A Stainless Steel
    D2 N/A 32.00 mm N/A 40.00 mm N/A 50.00 mm N/A 60.00 mm N/A 32.00 mm
    D3 N/A 31.00 mm N/A 31.00 mm N/A 41.00 mm N/A 50.00 mm N/A 31.00 mm
    H2 N/A 5.00 mm N/A 6.00 mm N/A 7.0 mm N/A 8.00 mm N/A 5.00 mm
    H1 N/A 22.00 mm N/A 26.00 mm N/A 32.00 mm N/A 42.00 mm N/A 22.00 mm
    T N/A 10.00 mm N/A 12.00 mm N/A 14.00 mm N/A 18.00 mm N/A 10.00 mm
    D1 N/A M10 mm N/A M12 mm N/A M16 mm N/A M20 mm N/A M10 mm
    SW N/A 17 mm N/A 19 mm N/A 24 mm N/A 30 mm N/A 17 mm
    H3 (under pressure of 0 / 0.4 / 0.6 N/mm²) N/A 8 / 6.8 / 5.9 mm
    Load capacity (under pressure of 0.4 N/mm²) N/A 212 N N/A 212 N N/A 435 N N/A 705 N N/A 212 N
    Max Load N/A
    Stud Length N/A