Print Back

Material:
-Steel quality class 5.8

Surface finish:
-Blue chromated

Note:
-Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.

On request:
Special versions.

(Kipp Original Design)
L-Handle Indexing Plunger - Inch
L-Handle Indexing Plunger - Inch
Unit of Measure
Items L-Handle Indexing Plunger - Inch
M65439
L-Handle Indexing Plunger - Metric
L-Handle Indexing Plunger - Inch
M65447
L-Handle Indexing Plunger - Metric
L-Handle Indexing Plunger - Inch
M65441
L-Handle Indexing Plunger - Metric
L-Handle Indexing Plunger - Inch
M65443
L-Handle Indexing Plunger - Metric
L-Handle Indexing Plunger - Inch
M65445
L-Handle Indexing Plunger - Metric
Finish N/A Steel Blue Chromate
L N/A 41.50 in N/A 54.00 in N/A 65.00 in N/A 73.00 in N/A 103.00 in
A N/A 16.00 in N/A 19.00 in N/A 23.00 in N/A 31.00 in N/A 33.00 in
D N/A 4.00 in N/A 5.00 in N/A 6.00 in N/A 8.00 in N/A 10.00 in
H N/A 10.00 in N/A 12.00 in N/A 14.00 in N/A 19.00 in N/A 25.00 in
D2 N/A 2.30 in N/A 3.00 in N/A 3.50 in N/A 4.70 in N/A 4.70 in
L2 N/A 12.00 in N/A 15.00 in N/A 18.00 in N/A 22.00 in N/A 27.00 in
L3 N/A 17.00 in N/A 24.00 in N/A 30.00 in N/A 28.00 in N/A 45.00 in
L1 N/A 20.00 in N/A 27.00 in N/A 34.00 in N/A 32.00 in N/A 51.00 in
D1 N/A M6 mm N/A M8 mm N/A M10 mm N/A M12 mm N/A M16 mm
F x 30° N/A 0.70 in N/A 0.90 in N/A 1.10 in N/A 1.30 in N/A 1.60 in
F1 - Spring Force Initial Pressure N/A 3 N N/A 3.5 N N/A 4 N N/A 4 N N/A 4 N
F2 - Spring Force Final Pressure N/A 10 N N/A 13.5 N N/A 16 N N/A 22 N N/A 23 N
SW1 N/A 6.00 in N/A 8.00 in N/A 10.00 in N/A 12.00 in N/A 16.00 in
Tightening Torque Max. N/A 1.6 nm N/A 4.5 nm N/A 10 nm N/A 13 nm N/A 42 nm