SLEEVE - PUSH FIT 12MM
Features:
ELESA Original Design.
Features:
- Material - Elastomer Technopolymer with Shore Hardness of D 40
- Finish - Matte Black
- Push-fit on Plain Shaft - h9 Tolerance
- Elastic Coupling - Not Affected by Vibrations and does not Tend to Loosen
- Resistant to Solvents, Oils, Greases, and other Chemical Agents
- Tapped Blind Hole Assembly instructions: Carefully fit handle onto slightly chamfered end of shaft and push as far as possible by hand; then tap handle with a wooden or plastic mallet until firmly in place.
ELESA Original Design.
Unit of Measure
Material |
N/A Elastomer Technopolymer |
Finish |
N/A Matte Black |
A - Thread Size |
N/A M12 x1.75 |
B - Handle Diameter |
N/A 21.00 mm |
D - Diameter |
N/A 45.00 mm |
F - Overall Length |
N/A 65.00 mm |
Z4 - Depth |
N/A 50.00 mm |
Country of Origin |
N/A Can be sourced domestically |
Alternate P/N |
N/A 30939 |
Why OneMonroe? |
N/A VMI - Custom Manufacturing - Technical Guides - Quality - Company Overview |
Warning |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
