Print Back

J-nuts can attach two sheet-metal panels quickly and easily – in place of welding. The nut clips to the edge of one panel and stays in place as a screw is driven into the J-nut, securing the panels to each other. An extrusion on the J-nut’s retaining leg grips the mounting hole, keeping the nut affixed to the adjoining panel. J-nuts allow movement to accommodate panel misalignments.

J-nuts weigh less than other fasteners, yet still provide a strong, reliable hold, no special skills or tools are required for installation or removal.

Benefits: quick, one-hand installation or removal, allows for panel realignments, reliable Die Co. quality, on-time delivery & competitive pricing.

Available for: sheet-metal screw sizes #6A to #10Z, machine screw sizes 6-32 to ¼-20. Various styles, including: no extrusion on lower leg & straight upper leg.

Various finishes, including: soluble oil, phosphate & oil, phosphate & water-based paint, zinc electroplate & water-based zinc coating.

j-nut-picture
Unit of Measure
Items j-nut-picture
DCS-1413
J Nuts
j-nut-picture
DCS-214
J Nuts
j-nut-picture
DCS-917
J Nuts
j-nut-picture
DCS-486
J Nuts
j-nut-picture
DCS-302
J Nuts
Design Variation N/A BCDE N/A STD. N/A STD. N/A BCF N/A ACDE
Screw Size N/A 6-32 N/A 8A N/A 8A N/A 8A N/A 8A
P Panel Range N/A .045-.062 N/A .060 Max. N/A .053-.067 N/A .062-.087 N/A .080-.110
A Length N/A 0.53 N/A 0.53 N/A 0.53 N/A 0.64 N/A 0.55
B Width N/A 0.50 N/A 0.44 N/A 0.44 N/A 0.44 N/A 0.50
C C/L Hole to Edge Max. N/A 0.24 N/A 0.28 N/A 0.25 N/A 0.25 N/A 0.28
X Center Imp. To End N/A 0.25 N/A 0.20 N/A 0.20 N/A 0.30 N/A 0.21
G Panel Hole Dia. N/A 0.218 N/A 0.250 N/A 0.250 N/A 0.218 N/A 0.218
T Mat’l. Thk. N/A 0.017 N/A 0.020 N/A 0.020 N/A 0.020 N/A 0.020