Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
On request:
Special versions and spacer rings.
| Items |
 M65229 Indexing Plunger W/Extended Pin - Locking Pin Hardened - Steel - Metric |
M65181 Indexing Plunger W/Extended Pin - Locking Pin Hardened - Steel - Metric |
M65187 Indexing Plunger W/Extended Pin - Locking Pin Hardened - Steel - Metric |
M65205 Indexing Plunger W/Extended Pin - Locking Pin Hardened - Steel - Metric |
M65221 Indexing Plunger W/Extended Pin - Locking Pin Hardened - Steel - Metric |
|||||
| Material | Steel | |||||||||
| Style | A | |||||||||
| L | 33.00 mm | 41.00 mm | 47.00 mm | 55.00 mm | 72.00 mm | |||||
| D | 3.00 mm | 4.00 mm | 5.00 mm | 6.00 mm | 8.00 mm | |||||
| H | 5.00 mm | 6.00 mm | 8.00 mm | 9 mm | 12 mm | |||||
| D2 | 14.00 mm | 18.00 mm | 21.00 mm | 25.00 mm | 33.00 mm | |||||
| L2 | 5.00 mm | 6.00 mm | 7.00 mm | 8.00 mm | 10.00 mm | |||||
| L3 | 10.00 mm | 13.00 mm | 15.00 mm | 17.00 mm | 23.00 mm | |||||
| L1 | 12.00 mm | 15.00 mm | 17.00 mm | 20.00 mm | 26.00 mm | |||||
| F x 30° | 0.80 mm | 1.00 mm | 1.30 mm | 1.80 mm | 2.30 mm | |||||
| F1 - Spring Force Initial Pressure | 4.5 N | 6 N | 5 N | 6 N | 15 N | |||||
| F2 - Spring Force Final Pressure | 11 N | 15 N | 16 N | 18 N | 45 N | |||||
| SW1 | 8.00 mm | 10.00 mm | 13.00 mm | 14.00 mm | 19.00 mm | |||||
| SW2 | ||||||||||
| D1 | M6 X 0.75 mm | M8 X 1.00 mm | M10 X 1.00 mm | M12 X 1.50 mm | M16 X 1.50 mm | |||||
| End Pressure Initial-Final | ||||||||||
|
|
||||||||||
