Print Back

Material:

  • Steel version, locking pin hardened: quality class 5.8
  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
  • Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

    Key ring 1.4310, natural finish

    Surface finish:

  • Steel version, locking pin hardened: black oxide finish, locking pin ground
  • Stainless steel version, locking pin hardened: natural finish, locking pin ground
  • Stainless steel version, locking pin not hardened: natural finish, locking pin ground

    Note:
    Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been disengaged.The key ring is also suitable for actuation of the locking bolt, for example automatically (programme-controlled) with the aid of a pneumatic cylinder or actuation by remote control with bowden cables.

    On request:
    Special versions and spacer rings.

    (Kipp Original Design)
  • Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric
    Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric
    Unit of Measure
    Items Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric
    M65564
    Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric
    Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric
    M65565
    Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric
    Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric
    M65566
    Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric
    Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric
    M65567
    Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric
    Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric
    M65568
    Indexing Plunger W/Pull Ring - Locking Pin Hardened - Steel - Metric
    Material N/A Steel
    Style N/A R
    D N/A 4.00 mm N/A 5.00 mm N/A 6.00 mm N/A 8.00 mm N/A 10.00 mm
    H N/A 4.00 mm N/A 5.00 mm N/A 6.00 mm N/A 8.00 mm N/A 10 mm
    D4 N/A 15.00 mm N/A 23.00 mm N/A 23.00 mm N/A 28.00 mm N/A 28.00 mm
    L2 N/A 6.00 mm N/A 7.00 mm N/A 8.00 mm N/A 10.00 mm N/A 12.00 mm
    L1 N/A 15.00 mm N/A 17.00 mm N/A 20.00 mm N/A 26.00 mm N/A 28.00 mm
    D1 N/A M8 X 1.00 mm N/A M10 X 1.00 mm N/A M12 X 1.50 mm N/A M16 X 1.50 mm N/A M20 X 1.50 mm
    F x 30° N/A 1.00 mm N/A 1.30 mm N/A 1.80 mm N/A 2.30 mm N/A 2.80 mm
    F1 - Spring Force Initial Pressure N/A 6 N N/A 5 N N/A 6 N N/A 15 N N/A 15 N
    F2 - Spring Force Final Pressure N/A 12 N N/A 12 N N/A 14 N N/A 35 N N/A 34 N
    L4 N/A 13.00 mm N/A 15.00 mm N/A 17.00 mm N/A 23.00 mm N/A 25.00 mm
    SW1 N/A 10.00 mm N/A 13.00 mm N/A 14.00 mm N/A 19.00 mm N/A 22.00 mm
    SW2 N/A
    End Pressure Initial-Final N/A