Print Back

Material:
Body in aluminum; spring in steel; pressure pin in steel or in plastic

Surface finish:
Pressure pin (steel) surface hardened and galvanized; body blue galvanized

Note:
Lateral Spring Plungers aid in the positioning and clamping, holding and fastening of tools and parts during engraving, labelling, drilling, galling, threading, honing, grinding, welding, soldering, hard-facing, assembling, etc. In order to position, see 03330 for suitable eccentric bushes.

(Kipp Original Design)
Lateral Spring Plungers
Lateral Spring Plunger - No Seal - Metric
Unit of Measure
Items Lateral Spring Plungers
M65796
Lateral Spring Plunger - W/Seal - Metric
Lateral Spring Plungers
M65797
Lateral Spring Plunger - W/Seal - Metric
Lateral Spring Plungers
M65798
Lateral Spring Plunger - W/Seal - Metric
Lateral Spring Plungers
M65799
Lateral Spring Plunger - W/Seal - Metric
Lateral Spring Plungers
M65800
Lateral Spring Plunger - W/Seal - Metric
L N/A 4.00 mm N/A 4.00 mm N/A 4.00 mm N/A 6.00 mm N/A 6.00 mm
D N/A 0.25 in N/A 0.25 in N/A 0.25 in N/A 0.4375 in N/A 0.4375 in
F N/A 10.00 N N/A 20.00 N N/A 40.00 N N/A 20.00 N N/A 50.00 N
D2 N/A 0.25 in N/A 0.25 in N/A 0.25 in N/A 0.4375 in N/A 0.4375 in
L1 N/A 7.00 mm N/A 7.00 mm N/A 7.00 mm N/A 12.00 mm N/A 12.00 mm
D1 N/A 3.00 mm N/A 3.00 mm N/A 3.00 mm N/A 5.00 mm N/A 5.00 mm
±S N/A 0.5 mm N/A 0.5 mm N/A 0.5 mm N/A 0.8 mm N/A 0.8 mm
X if Y = 1 N/A 0.8 mm N/A 0.8 mm N/A 0.8 mm N/A N/A
X if Y = 2 N/A 1 mm N/A 1 mm N/A 1 mm N/A 1.5 mm N/A 1.5 mm
X if Y = 3 N/A 1 mm N/A 1 mm N/A 1 mm N/A 1.7 mm N/A 1.7 mm
X if Y = 4,5 N/A 1 mm N/A 1 mm N/A 1 mm N/A 1.7 mm N/A 1.7 mm
X if Y = 6 N/A 1 mm N/A 1 mm N/A 1 mm N/A 1.7 mm N/A 1.7 mm
X if Y = 8 N/A 1 mm N/A 1 mm N/A 1 mm N/A 1.7 mm N/A 1.7 mm
End Pressure Initial-Final N/A