Material:
Mushroom knob in thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
| Items |
 M64913 Indexing Plunger W/Pull Knob - Locking Pin Hardened - Stainless Steel - Metric |
M64899 Indexing Plunger W/Pull Knob - Locking Pin Hardened - Stainless Steel - Metric |
M64901 Indexing Plunger W/Pull Knob - Locking Pin Hardened - Stainless Steel - Metric |
M64903 Indexing Plunger W/Pull Knob - Locking Pin Hardened - Stainless Steel - Metric |
M64905 Indexing Plunger W/Pull Knob - Locking Pin Hardened - Stainless Steel - Metric |
|||||
| Material | Stainless Steel | |||||||||
| Style | A | |||||||||
| L | 32.00 mm | 39.00 mm | 44.00 mm | 52.00 mm | 68.00 mm | |||||
| D | 3.00 mm | 4.00 mm | 5.00 mm | 6.00 mm | 8.00 mm | |||||
| H | 3.50 mm | 4.00 mm | 5.00 mm | 6.00 mm | 8.00 mm | |||||
| D2 | 14.00 mm | 18.00 mm | 21.00 mm | 25.00 mm | 33.00 mm | |||||
| L2 | 5.00 mm | 6.00 mm | 7.00 mm | 8.00 mm | 10.00 mm | |||||
| L3 | 10.00 mm | 13.00 mm | 15.00 mm | 17.00 mm | 23.00 mm | |||||
| L1 | 12.00 mm | 15.00 mm | 17.00 mm | 20.00 mm | 26.00 mm | |||||
| D1 | M6 X 0.75 mm | M8 X 1.00 mm | M10 X 1.00 mm | M12 X 1.50 mm | M16 X 1.50 mm | |||||
| F x 30° | 0.80 mm | 1.00 mm | 1.30 mm | 1.80 mm | 2.30 mm | |||||
| F1 - Spring Force Initial Pressure | 4.5 N | 6 N | 5 N | 6 N | 15 N | |||||
| F2 - Spring Force Final Pressure | 11 N | 12 N | 12 N | 14 N | 35 N | |||||
| SW1 | 8.00 mm | 10.00 mm | 13.00 mm | 14.00 mm | 19.00 mm | |||||
| SW2 | ||||||||||
| End Pressure Initial-Final | ||||||||||
| Diameter | ||||||||||
| Stud Length | ||||||||||
|
|
||||||||||
