Print Back

Wave spring washers provide medium loads in a small axial space. This series is split, in other words there is a small gap in the wave circumference. This gap or split allows the ends to move during compression, which if constrained in a bore prevents binding. Common applications for this type of parts is adjacent to ball bearings, where shaft take up or thermal expansion & contraction accommodation is required. The gap or split is advantageous for such applications where the bore is made of softer material than the spring.

Wave Washer with Gap
Wave Washer with Gap
Unit of Measure
Items Wave Washer with Gap
M033702056
Wave Washer with Gap - High Carbon Steel
Wave Washer with Gap
M035002058
Wave Washer with Gap - High Carbon Steel
Wave Washer with Gap
M036202060
Wave Washer with Gap - High Carbon Steel
Wave Washer with Gap
M037502062
Wave Washer with Gap - High Carbon Steel
Wave Washer with Gap
M038703064
Wave Washer with Gap - High Carbon Steel
Weight N/A 0.014043 Pound N/A 0.014563 Pound N/A 0.015083 Pound N/A 0.015603 Pound N/A 0.016123 Pound
Material N/A High Carbon, C 1060-1075 / SWRH72A
Height N/A 3.375 Inch N/A 3.500 Inch N/A 3.625 Inch N/A 3.750 Inch N/A 3.875 Inch
Depth N/A 0.220 Inch N/A 0.260 Inch N/A 0.270 Inch N/A 0.280 Inch N/A 0.310 Inch
Width N/A 0.220 Inch N/A 0.260 Inch N/A 0.270 Inch N/A 0.280 Inch N/A 0.310 Inch
Minimum ID (In.) N/A 2.940 Inch N/A 3.070 Inch N/A 3.190 Inch N/A 3.320 Inch N/A 3.440 Inch
Maximum OD (In.) N/A 3.375 Inch N/A 3.500 Inch N/A 3.625 Inch N/A 3.750 Inch N/A 3.875 Inch
Thickness (In.) N/A 0.030 Inch
Free Height (Approx) (In.) N/A 0.220 Inch N/A 0.260 Inch N/A 0.270 Inch N/A 0.280 Inch N/A 0.310 Inch
Loaded Height (In.) N/A 0.109 Inch
# of Waves N/A 4