Wave spring washers are normally used in thrust-loading applications for small deflections, particularly where radial space is limited. A typical example is the axial loading of ball bearings. The spring rate is approximately linear between 20% and 80% of available deflection.Certificate of compliance available upon request - Certificate of chemical analysis available at extra cost.

Stainless Steel - Commercial Type 302 & Government AMS 5906 (Chemical only) - Type 302

High Carbon Steel - Commercial 1074-1095– Certified to ASTM-A684 & Commercial 1074– Certified to ASTM-A684

Finish - Washers are carried in stock in plain finish suitable for various types of finishes: either electroplated or mechanically plated (a process which reduces the possibility of hydrogen embrittlement). Please call us for recommendations on special or specific applications.

Unit of Measure

Weight

0.000353 pounds

Material

302 Stainless Steel (Commercial) AMS 5906 (Chemical)

Height

0.608 inches

Depth

0.037 inches

Width

0.037 inches

Country of Origin

US

Thickness (In.)

0.0080 Inch

Free Height (Approx) (In.)

0.037 Inch

Nominal Spring Rate (lbs/In.)

333 lbs/in

Inside Diameter (In.)

0.459 Inch

Outside Diameter (In.)

0.608 Inch

# of Waves

3

Warning

Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.