Indexing Plunger W/Pull Knob - Locking Pin Hardened - Steel - Metric
Kipp - Pins
Steel version, locking pin hardened:
quality class 5.8
Stainless steel version, locking pin hardened:
threaded sleeve 1.4305
locking pin 1.4034
Stainless steel version, locking pin not hardened:
threaded sleeve 1.4305
locking pin 1.4305
Steel version, locking pin hardened:
black oxide finish, locking pin ground
Stainless steel version, locking pin hardened:
natural finish, locking pin ground
Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Material:
Mushroom knob in thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
Style C is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
On request:
Special versions and spacer rings.
Unit of Measure
Items |
![]() M65145 Indexing Plunger W/Pull Knob - Locking Pin Hardened - Steel - Metric |
![]() M64963 Indexing Plunger W/Pull Knob - Locking Pin Hardened - Steel - Metric |
![]() M64967 Indexing Plunger W/Pull Knob - Locking Pin Hardened - Steel - Metric |
![]() M65049 Indexing Plunger W/Pull Knob - Locking Pin Hardened - Steel - Metric |
![]() M65067 Indexing Plunger W/Pull Knob - Locking Pin Hardened - Steel - Metric |
|||||
Material | N/A Steel | |||||||||
Style | N/A A | |||||||||
L | N/A 32.00 mm | N/A 39.00 mm | N/A 44.00 mm | N/A 52.00 mm | N/A 68.00 mm | |||||
D | N/A 3.00 mm | N/A 4.00 mm | N/A 5.00 mm | N/A 6.00 mm | N/A 8.00 mm | |||||
H | N/A 3.50 mm | N/A 4.00 mm | N/A 5.00 mm | N/A 6.00 mm | N/A 8.00 mm | |||||
D2 | N/A 14.00 mm | N/A 18.00 mm | N/A 21.00 mm | N/A 25.00 mm | N/A 33.00 mm | |||||
L2 | N/A 5.00 mm | N/A 6.00 mm | N/A 7.00 mm | N/A 8.00 mm | N/A 10.00 mm | |||||
L3 | N/A 10.00 mm | N/A 13.00 mm | N/A 15.00 mm | N/A 17.00 mm | N/A 23.00 mm | |||||
L1 | N/A 12.00 mm | N/A 15.00 mm | N/A 17.00 mm | N/A 20.00 mm | N/A 26.00 mm | |||||
D1 | N/A M6 X 0.75 mm | N/A M8 X 1.00 mm | N/A M10 X 1.00 mm | N/A M12 X 1.50 mm | N/A M16 X 1.50 mm | |||||
F x 30° | N/A 0.80 mm | N/A 1.00 mm | N/A 1.30 mm | N/A 1.80 mm | N/A 2.30 mm | |||||
F1 - Spring Force Initial Pressure | N/A 4.5 N | N/A 6 N | N/A 5 N | N/A 6 N | N/A 15 N | |||||
F2 - Spring Force Final Pressure | N/A 11 N | N/A 12 N | N/A 12 N | N/A 14 N | N/A 35 N | |||||
SW1 | N/A 8.00 mm | N/A 10.00 mm | N/A 13.00 mm | N/A 14.00 mm | N/A 19.00 mm | |||||
SW2 | N/A | |||||||||
End Pressure Initial-Final | N/A | |||||||||
Diameter | N/A | |||||||||
Stud Length | N/A | |||||||||
|