Indexing Plunger Short Version - Locking Pin Not Hardened - Metric
Kipp - Pins
Steel version, locking pin hardened:
quality class 5.8
Stainless steel version, locking pin not hardened:
threaded sleeve 1.4305
locking pin 1.4305
Steel version, locking pin hardened:
black oxide finish, locking pin ground
Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Style C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
Unit of Measure
Items |
![]() M65104 Indexing Plunger Short Version - Locking Pin Not Hardened - Metric |
![]() M65106 Indexing Plunger Short Version - Locking Pin Not Hardened - Metric |
![]() M65110 Indexing Plunger Short Version - Locking Pin Not Hardened - Metric |
![]() M65112 Indexing Plunger Short Version - Locking Pin Not Hardened - Metric |
![]() M65114 Indexing Plunger Short Version - Locking Pin Not Hardened - Metric |
|||||
Material | N/A Stainless Steel | |||||||||
Style | N/A A | |||||||||
L | N/A 29.50 mm | N/A 34.50 mm | N/A 41.70 mm | N/A 54.00 mm | N/A 61.00 mm | |||||
D | N/A 4.00 mm | N/A 5.00 mm | N/A 6.00 mm | N/A 8.00 mm | N/A 10.00 mm | |||||
H | N/A 4.00 mm | N/A 5.00 mm | N/A 6.00 mm | N/A 8.00 mm | N/A 10 mm | |||||
D2 | N/A 18.00 mm | N/A 21.00 mm | N/A 25.00 mm | N/A 33.00 mm | N/A 33.00 mm | |||||
L2 | N/A 6.00 mm | N/A 7.00 mm | N/A 8.00 mm | N/A 10.00 mm | N/A 12.00 mm | |||||
L1 | N/A 6.00 mm | N/A 8.00 mm | N/A 10.00 mm | N/A 12.00 mm | N/A 15.00 mm | |||||
D1 | N/A 5/16-24 in | N/A 3/8-24 in | N/A 1/2-13 in | N/A 5/8-11 in | N/A 3/4-10 in | |||||
F x 30° | N/A 1.00 mm | N/A 1.30 mm | N/A 1.80 mm | N/A 2.30 mm | N/A 2.80 mm | |||||
F1 - Spring Force Initial Pressure | N/A 6 N | N/A 5 N | N/A 6 N | N/A 14 N | N/A 15 N | |||||
F2 - Spring Force Final Pressure | N/A 12 N | N/A 12 N | N/A 14 N | N/A 28 N | N/A 32 N | |||||
SW1 | N/A 10.00 mm | N/A 13.00 mm | N/A 14.00 mm | N/A 19.00 mm | N/A 22.00 mm | |||||
SW2 | N/A | |||||||||
End Pressure Initial-Final | N/A | |||||||||
|