Indexing Plunger - No Pull Knob - Locking Pin Not Hardened - Stainless Steel - Metric
Kipp - Pins
Steel version, locking pin hardened:
quality class 5.8
Stainless steel version, locking pin hardened:
threaded sleeve 1.4305
locking pin 1.4034
Stainless steel version, locking pin not hardened:
threaded sleeve 1.4305
locking pin 1.4305
Steel version, locking pin hardened:
black oxide finish, locking pin ground
Stainless steel version, locking pin hardened:
natural finish, locking pin ground
Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Material:
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Special grips can be fitted on the threaded head. These pins are also suitable for automated actuation of the locking bolt by pneumatic cylinder or bowden cables.
On request:
Special versions and spacer rings.
Unit of Measure
Items |
![]() M65509 Indexing Plunger - No Pull Knob - Locking Pin Not Hardened - Stainless Steel - Metric |
![]() M65493 Indexing Plunger - No Pull Knob - Locking Pin Not Hardened - Stainless Steel - Metric |
![]() M65497 Indexing Plunger - No Pull Knob - Locking Pin Not Hardened - Stainless Steel - Metric |
![]() M65499 Indexing Plunger - No Pull Knob - Locking Pin Not Hardened - Stainless Steel - Metric |
![]() M65501 Indexing Plunger - No Pull Knob - Locking Pin Not Hardened - Stainless Steel - Metric |
|||||
Material | N/A Stainless Steel | |||||||||
Style | N/A E | |||||||||
L | N/A 24.00 mm | N/A 32.00 mm | N/A 37.00 mm | N/A 42.00 mm | N/A 56.00 mm | |||||
D | N/A 3.00 mm | N/A 4.00 mm | N/A 5.00 mm | N/A 6.00 mm | N/A 8.00 mm | |||||
H | N/A 3.50 mm | N/A 4.00 mm | N/A 5.00 mm | N/A 6.00 mm | N/A 8.00 mm | |||||
L2 | N/A 5.00 mm | N/A 6.00 mm | N/A 7.00 mm | N/A 8.00 mm | N/A 10.00 mm | |||||
L3 | N/A 3.50 mm | N/A 7.00 mm | N/A 8.00 mm | N/A 8.00 mm | N/A 12.00 mm | |||||
L1 | N/A 12.00 mm | N/A 15.00 mm | N/A 17.00 mm | N/A 20.00 mm | N/A 26.00 mm | |||||
D1 | N/A 1/4-28 in | N/A 5/16-24 in | N/A 3/8-24 in | N/A 1/2-13 in | N/A 5/8-11 in | |||||
F x 30° | N/A 0.80 mm | N/A 1.00 mm | N/A 1.30 mm | N/A 1.80 mm | N/A 2.30 mm | |||||
F1 - Spring Force Initial Pressure | N/A 5 N | N/A 6 N | N/A 5 N | N/A 6 N | N/A 15 N | |||||
F2 - Spring Force Final Pressure | N/A 9 N | N/A 12 N | N/A 12 N | N/A 14 N | N/A 35 N | |||||
L4 | N/A 10.00 mm | N/A 13.00 mm | N/A 15.00 mm | N/A 17.00 mm | N/A 23.00 mm | |||||
SW1 | N/A 8.00 mm | N/A 10.00 mm | N/A 13.00 mm | N/A 14.00 mm | N/A 19.00 mm | |||||
SW2 | N/A | |||||||||
D2 | N/A M2 mm | N/A M3 mm | N/A M4 mm | N/A M6 mm | N/A M8 mm | |||||
End Pressure Initial-Final | N/A | |||||||||
Diameter | N/A | |||||||||
Stud Length | N/A | |||||||||
|