Indexing Plunger with Exted Pin - No Collar - Locking Pin Not Hardened - Stainless Steel - Metric
Kipp - Pins
Steel version, locking pin hardened:
quality class 5.8
Stainless steel version, locking pin hardened:
threaded sleeve 1.4305
locking pin 1.4034
Stainless steel version, locking pin not hardened:
threaded sleeve 1.4305
locking pin 1.4305
Steel version, locking pin hardened:
black oxide finish, locking pin ground
Stainless steel version, locking pin hardened:
natural finish, locking pin ground
Stainless steel version, locking pin not hardened:
natural finish, locking pin ground
Material:
Mushroom knob in anthracite gray thermoplastic
Surface finish:
Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged.
In order to screw in the locking bolts, a screw-in washer can be supplied. The washer is slid beneath the disengaged mushroom knob so that the follower pins engage in the slot.
Unit of Measure
Items |
![]() M65708 Indexing Plunger with Exted Pin - No Collar - Locking Pin Not Hardened - Stainless Steel - Metric |
![]() M65692 Indexing Plunger with Exted Pin - No Collar - Locking Pin Not Hardened - Stainless Steel - Metric |
![]() M65696 Indexing Plunger with Exted Pin - No Collar - Locking Pin Not Hardened - Stainless Steel - Metric |
![]() M65698 Indexing Plunger with Exted Pin - No Collar - Locking Pin Not Hardened - Stainless Steel - Metric |
![]() M65700 Indexing Plunger with Exted Pin - No Collar - Locking Pin Not Hardened - Stainless Steel - Metric |
|||||
Material | N/A Stainless Steel | |||||||||
Style | N/A G | |||||||||
L | N/A 33.00 mm | N/A 41.00 mm | N/A 47.00 mm | N/A 55.00 mm | N/A 72.00 mm | |||||
D | N/A 3.00 mm | N/A 4.00 mm | N/A 5.00 mm | N/A 6.00 mm | N/A 8.00 mm | |||||
H | N/A 5.00 mm | N/A 6.00 mm | N/A 8.00 mm | N/A 9 mm | N/A 12 mm | |||||
D2 | N/A 14.00 mm | N/A 18.00 mm | N/A 21.00 mm | N/A 25.00 mm | N/A 33.00 mm | |||||
L2 | N/A 11.00 mm | N/A 14.00 mm | N/A 15.00 mm | N/A 18.00 mm | N/A 24.00 mm | |||||
L1 | N/A 17.00 mm | N/A 21.00 mm | N/A 24.00 mm | N/A 28.00 mm | N/A 36.00 mm | |||||
D1 | N/A M6 X 0.75 mm | N/A M8 X 1.00 mm | N/A M10 X 1.00 mm | N/A M12 X 1.50 mm | N/A M16 X 1.50 mm | |||||
F x 30° | N/A 0.80 mm | N/A 1.00 mm | N/A 1.30 mm | N/A 1.80 mm | N/A 2.30 mm | |||||
F1 - Spring Force Initial Pressure | N/A 4.5 N | N/A 6 N | N/A 5 N | N/A 6 N | N/A 15 N | |||||
F2 - Spring Force Final Pressure | N/A 11 N | N/A 15 N | N/A 16 N | N/A 18 N | N/A 45 N | |||||
SW | N/A | |||||||||
End Pressure Initial-Final | N/A | |||||||||
|