Indexing Plunger Short Version - Locking Pin Hardened

Material:

Steel version, locking pin hardened: quality class 5.8

Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

Mushroom knob in anthracite gray thermoplastic

Surface finish:

Steel version, locking pin hardened: black oxide finish, locking pin ground

Stainless steel version, locking pin not hardened: natural finish, locking pin ground

Note:
Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Style C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.

(Kipp Original Design)

Request Information

Unit of Measure

Items	M65291 Indexing Plunger Short Version - Locking Pin Hardened - Metric	M65293 Indexing Plunger Short Version - Locking Pin Hardened - Metric	M65295 Indexing Plunger Short Version - Locking Pin Hardened - Metric	M65297 Indexing Plunger Short Version - Locking Pin Hardened - Metric	M65299 Indexing Plunger Short Version - Locking Pin Hardened - Metric
Material	N/A Steel
Style	N/A A
L	N/A 30 mm	N/A 35.00 mm	N/A 42.00 mm	N/A 54.00 mm	N/A 61.00 mm
D	N/A 4.00 mm	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm	N/A 10.00 mm
H	N/A 4.00 mm	N/A 5.00 mm	N/A 6.00 mm	N/A 8.00 mm	N/A 10 mm
D2	N/A 18.00 mm	N/A 21.00 mm	N/A 25.00 mm	N/A 33.00 mm	N/A 33.00 mm
L2	N/A 6.00 mm	N/A 7.00 mm	N/A 8.00 mm	N/A 10.00 mm	N/A 12.00 mm
L1	N/A 6.00 mm	N/A 8.00 mm	N/A 10.00 mm	N/A 12.00 mm	N/A 15.00 mm
D1	N/A M8 X 1.00 mm	N/A M10 X 1.00 mm	N/A M12 X 1.50 mm	N/A M16 X 1.50 mm	N/A M20 X 1.50 mm
F x 30°	N/A 1.00 mm	N/A 1.30 mm	N/A 1.80 mm	N/A 2.30 mm	N/A 2.80 mm
F1 - Spring Force Initial Pressure	N/A 6 N	N/A 5 N	N/A 6 N	N/A 14 N	N/A 15 N
F2 - Spring Force Final Pressure	N/A 12 N	N/A 12 N	N/A 14 N	N/A 28 N	N/A 32 N
SW1	N/A 10.00 mm	N/A 13.00 mm	N/A 14.00 mm	N/A 19.00 mm	N/A 22.00 mm
SW2	N/A
End Pressure Initial-Final	N/A