Applications

Tungsten carbide balls are used where extreme hardness and wear resistance is required; in such applications as bearings, ball screws, valves and flowmeters. They are also used for coining and as pivots, detents and tips for gages and tracers. Decimal-inch sized tungsten carbide balls are widely used for ballizing (below) or measuring hole sizes (see Inspection Products data sheet). They are also used for inspection tools, comparative checking and gaging.

Features

Tungsten carbide itself is practically inert; any attack is usually on the binder. Since other materials are less expensive, the selection of tungsten carbide solely for corrosion resistance is usually not justified. In severely corrosive conditions, carbides with more resistant binder formulation can be supplied.

Ballizing

Low-cost, high-speed hole sizing and Finishing

Ballizing is a fast low-cost process for sizing and finishing tubing and holes in metal. Pressing a slightly oversized tungsten carbide ball through the unfinished hole brings the hole up to desired size in seconds. The resulting surface finish is excellent and both size and finish results are very consistent. All size +.0001 -.0001

For more info please click on the chart below

76 - 100 of 111 | Results Per Page | View | Unit of Measure
1 2 3 4 5 
Clear Filter

Ball DIameter (in)

Item #

IntegrationID

A - Ball Diameter

N/A
6658
N/A 0.3755 in
N/A
6659
N/A 0.3760 in
N/A
6660
N/A 0.3765 in
N/A
6661
N/A 0.4047 in
N/A
6662
N/A 0.4052 in
N/A
6663
N/A 0.4057 in
N/A
6664
N/A 0.40625 in
N/A
6665
N/A 0.4068 in
N/A
6666
N/A 0.4073 in
N/A
6667
N/A 0.4078 in
N/A
6668
N/A 0.4360 in
N/A
6669
N/A 0.4365 in
N/A
6670
N/A 0.4370 in
N/A
6671
N/A 0.43750 in
N/A
6672
N/A 0.4380 in
N/A
6673
N/A 0.4385 in
N/A
6674
N/A 0.4390 in
N/A
6675
N/A 0.4672 in
N/A
6676
N/A 0.4677 in
N/A
6677
N/A 0.4682 in
N/A
6678
N/A 0.46875 in
N/A
6679
N/A 0.4693 in
N/A
6680
N/A 0.4698 in
N/A
6681
N/A 0.4703 in
N/A
6682
N/A 0.4885 in
76 - 100 of 111 | Results Per Page | View | Unit of Measure
1 2 3 4 5