Tooling Balls
Tooling Balls
Applications
Tungsten carbide balls are used where extreme hardness and wear resistance is required; in such applications as bearings, ball screws, valves and flowmeters. They are also used for coining and as pivots, detents and tips for gages and tracers. Decimal-inch sized tungsten carbide balls are widely used for ballizing (below) or measuring hole sizes (see Inspection Products data sheet). They are also used for inspection tools, comparative checking and gaging.
Features
Tungsten carbide itself is practically inert; any attack is usually on the binder. Since other materials are less expensive, the selection of tungsten carbide solely for corrosion resistance is usually not justified. In severely corrosive conditions, carbides with more resistant binder formulation can be supplied.
Ballizing
Low-cost, high-speed hole sizing and Finishing
Ballizing is a fast low-cost process for sizing and finishing tubing and holes in metal. Pressing a slightly oversized tungsten carbide ball through the unfinished hole brings the hole up to desired size in seconds. The resulting surface finish is excellent and both size and finish results are very consistent. All size +.0001 -.0001
Tungsten carbide balls are used where extreme hardness and wear resistance is required; in such applications as bearings, ball screws, valves and flowmeters. They are also used for coining and as pivots, detents and tips for gages and tracers. Decimal-inch sized tungsten carbide balls are widely used for ballizing (below) or measuring hole sizes (see Inspection Products data sheet). They are also used for inspection tools, comparative checking and gaging.
Features
Tungsten carbide itself is practically inert; any attack is usually on the binder. Since other materials are less expensive, the selection of tungsten carbide solely for corrosion resistance is usually not justified. In severely corrosive conditions, carbides with more resistant binder formulation can be supplied.
Ballizing
Low-cost, high-speed hole sizing and Finishing
Ballizing is a fast low-cost process for sizing and finishing tubing and holes in metal. Pressing a slightly oversized tungsten carbide ball through the unfinished hole brings the hole up to desired size in seconds. The resulting surface finish is excellent and both size and finish results are very consistent. All size +.0001 -.0001
For more info please click on the chart below
Item # |
IntegrationID |
A - Ball Diameter |
---|---|---|
TB-31250 |
IntegrationID
N/A 6643 |
A - Ball Diameter N/A 0.31250 in |
TB-3120 |
IntegrationID
N/A 6642 |
A - Ball Diameter N/A 0.3120 in |
TB-3115 |
IntegrationID
N/A 6641 |
A - Ball Diameter N/A 0.3115 in |
TB-3110 |
IntegrationID
N/A 6640 |
A - Ball Diameter N/A 0.3110 in |
TB-2828 |
IntegrationID
N/A 6639 |
A - Ball Diameter N/A 0.2828 in |
TB-2823 |
IntegrationID
N/A 6638 |
A - Ball Diameter N/A 0.2823 in |
TB-2818 |
IntegrationID
N/A 6637 |
A - Ball Diameter N/A 0.2818 in |
TB-28125 |
IntegrationID
N/A 6636 |
A - Ball Diameter N/A 0.28125 in |
TB-2807 |
IntegrationID
N/A 6635 |
A - Ball Diameter N/A 0.2807 in |
TB-2802 |
IntegrationID
N/A 6634 |
A - Ball Diameter N/A 0.2802 in |
TB-2797 |
IntegrationID
N/A 6633 |
A - Ball Diameter N/A 0.2797 in |
TB-2515 |
IntegrationID
N/A 6632 |
A - Ball Diameter N/A 0.2515 in |
TB-2510 |
IntegrationID
N/A 6631 |
A - Ball Diameter N/A 0.2510 in |
TB-2505 |
IntegrationID
N/A 6630 |
A - Ball Diameter N/A 0.2505 in |
TB-25000 |
IntegrationID
N/A 6629 |
A - Ball Diameter N/A 0.2500 in |
TB-2495 |
IntegrationID
N/A 6628 |
A - Ball Diameter N/A 0.2495 in |
TB-2490 |
IntegrationID
N/A 6627 |
A - Ball Diameter N/A 0.2490 in |
TB-2485 |
IntegrationID
N/A 6626 |
A - Ball Diameter N/A 0.2485 in |
TB-2203 |
IntegrationID
N/A 6625 |
A - Ball Diameter N/A 0.2203 in |
TB-2198 |
IntegrationID
N/A 6624 |
A - Ball Diameter N/A 0.2198 in |
TB-2193 |
IntegrationID
N/A 6623 |
A - Ball Diameter N/A 0.2193 in |
TB-21875 |
IntegrationID
N/A 6622 |
A - Ball Diameter N/A 0.21875 in |
TB-2182 |
IntegrationID
N/A 6621 |
A - Ball Diameter N/A 0.2182 in |
TB-2177 |
IntegrationID
N/A 6620 |
A - Ball Diameter N/A 0.2177 in |
TB-2172 |
IntegrationID
N/A 6619 |
A - Ball Diameter N/A 0.2172 in |