• Corporate Address

    2990 Technology Dr,
    Rochester Hills, MI 48309

    AS9100D & ISO 9001:2015 CAGE:06197

  • Call Us: (877) 740-1077
    sales@askmonroe.com
    Live Chat

Loose Joint Hinges, variably referred to as slip, separable or take-apart hinges, have always been catalogued as right or left hand hinges. Because applications may vary, this has caused errors in in specification as to which is right or left hand. To simplify the selection of all loose joint hinges, we have identified each hinge by type and illustrated them in some detail. These hinges may be modified by hole piercing, swaging, forms and finishes. Refer to Special Hinge Guide. Other gauges, widths, lengths, and pin materials can be made to order.

This section contains the sizes and numbers of loose joint hinges which are considered standard and are usually carried in stock. These are surface type blank hinges without holes and less finish. They have spun or loose pins of similar material.

Other gauges, widths, lengths, and pin materials can be made to order. Prices based on quantity of order are available upon request. NO MINIMUM quantity required, any order acceptable.
1 - 25 of 27 | Results Per Page | View | Unit of Measure
1 2 

Item #

IntegrationID

Length

Type

Gauge

Open Width

Pin Diameter

Material/Type

Hinge Leaf Material

Hinge Pin Material

LJH1161-S N/A
100107
N/A 1.50 in N/A A N/A 0.048 in N/A 1.00 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1165-S N/A
100108
N/A 1.50 in N/A A N/A 0.048 in N/A 1.25 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1169-S N/A
100109
N/A 2.00 in N/A A N/A 0.048 in N/A 1.50 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1173-S N/A
100110
N/A 2.50 in N/A A N/A 0.048 in N/A 1.50 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1137-S N/A
100111
N/A 2.00 in N/A A N/A 0.06 in N/A 1.25 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1141-S N/A
100112
N/A 2.00 in N/A A N/A 0.06 in N/A 1.50 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1145-S N/A
100113
N/A 2.50 in N/A A N/A 0.06 in N/A 1.50 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1149-S N/A
100114
N/A 3.00 in N/A A N/A 0.06 in N/A 2.0 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1150-S N/A
100115
N/A 3.00 in N/A A N/A 0.06 in N/A 2.0 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1157-S N/A
100116
N/A 4.00 in N/A A N/A 0.06 in N/A 3.00 in N/A .125 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1121-S N/A
100117
N/A 2.00 in N/A A N/A 0.075 in N/A 1.50 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1125-S N/A
100118
N/A 2.50 in N/A A N/A 0.075 in N/A 2.0 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1129-S N/A
100119
N/A 3.00 in N/A A N/A 0.075 in N/A 2.0 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1134-S N/A
100120
N/A 4.00 in N/A A N/A 0.075 in N/A 3.00 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1097-S N/A
100121
N/A 2.00 in N/A A N/A 0.09 in N/A 1.50 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1101-S N/A
100122
N/A 2.50 in N/A A N/A 0.09 in N/A 1.50 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1105-S N/A
100123
N/A 2.50 in N/A A N/A 0.09 in N/A 2.0 in N/A 0.187 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1109-S N/A
100124
N/A 3.00 in N/A A N/A 0.09 in N/A 2.0 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1113-S N/A
100125
N/A 3.00 in N/A A N/A 0.09 in N/A 3.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1117-S N/A
100126
N/A 4.00 in N/A A N/A 0.09 in N/A 4.0 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1081-S N/A
100127
N/A 4.00 in N/A A N/A 0.120 in N/A 3.00 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1085-S N/A
100128
N/A 4.00 in N/A A N/A 0.120 in N/A 4.0 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1089-S N/A
100129
N/A 5.0 in N/A A N/A 0.120 in N/A 5.0 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1093-S N/A
100130
N/A 6.00 in N/A A N/A 0.120 in N/A 6.0 in N/A 0.25 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
LJH1177-S N/A
100131
N/A 4.00 in N/A A N/A 0.187 in N/A 3.00 in N/A 0.375 in N/A Plain Surface Type N/A Cold Rolled Steel and .187 GA - H.R.P.O. N/A Steel
1 - 25 of 27 | Results Per Page | View | Unit of Measure
1 2 

Are you looking for a quote?

About Monroe

Experience

Over 60 years of manufacturing experience to best server our customers

Read More >>

Capabilities

Monroe provides custom manufacturing solutions to clients throughout the world

Read More >>

Values

Our knowledge, customer service & processes are structured to reduce delivery times, improve quality & cut costs

Read More >>

Quality

We are ISO 9001:2015 & AS9100D certified and have a customer base in many diverse industries

Read More >>