QUESTIONS? TALK TO A SALES ENGINEER:
CALL (877) 740-1077 OR CHAT LIVE.

Sales@askmonroe.com | Locations Worldwide

Loose Joint Hinges, variably referred to as slip, separable or take-apart hinges, have always been catalogued as right or left hand hinges. Because applications may vary, this has caused errors in in specification as to which is right or left hand. To simplify the selection of all loose joint hinges, we have identified each hinge by type and illustrated them in some detail. These hinges may be modified by hole piercing, swaging, forms and finishes. Refer to Special Hinge Guide. Other gauges, widths, lengths, and pin materials can be made to order.

This section contains the sizes and numbers of loose joint hinges which are considered standard and are usually carried in stock. These are surface type blank hinges without holes and less finish. They have spun or loose pins of similar material.

Other gauges, widths, lengths, and pin materials can be made to order. Prices based on quantity of order are available upon request. NO MINIMUM quantity required, any order acceptable.
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1 

Item #

IntegrationID

Length

Type

Gauge

Open Width

Pin Diameter

Hinge Leaf Material

Hinge Pin Material

LJH1071-S N/A
100277
N/A 2.00 in N/A G N/A 0.048 in N/A 1.50 in N/A .125 in N/A Cold Rolled Steel N/A Steel
LJH1079-S N/A
100278
N/A 3.00 in N/A G N/A 0.048 in N/A 2.0 in N/A .125 in N/A Cold Rolled Steel N/A Steel
LJH1075-S N/A
100279
N/A 2.50 in N/A G N/A 0.048 in N/A 1.50 in N/A .125 in N/A Cold Rolled Steel N/A Steel
LJH1043-S N/A
100280
N/A 1.50 in N/A G N/A 0.06 in N/A 1.00 in N/A .125 in N/A Cold Rolled Steel N/A Steel
LJH1047-S N/A
100281
N/A 2.00 in N/A G N/A 0.06 in N/A 1.25 in N/A .125 in N/A Cold Rolled Steel N/A Steel
LJH1051-S N/A
100282
N/A 2.00 in N/A G N/A 0.06 in N/A 1.50 in N/A .125 in N/A Cold Rolled Steel N/A Steel
LJH1055-S N/A
100283
N/A 2.00 in N/A G N/A 0.06 in N/A 2.0 in N/A .125 in N/A Cold Rolled Steel N/A Steel
LJH1059-S N/A
100284
N/A 2.50 in N/A G N/A 0.06 in N/A 2.0 in N/A .125 in N/A Cold Rolled Steel N/A Steel
LJH1063-S N/A
100285
N/A 3.00 in N/A G N/A 0.06 in N/A 2.0 in N/A .125 in N/A Cold Rolled Steel N/A Steel
LJH1027-S N/A
100286
N/A 2.00 in N/A G N/A 0.075 in N/A 1.50 in N/A .125 in N/A Cold Rolled Steel N/A Steel
LJH1031-S N/A
100287
N/A 2.50 in N/A G N/A 0.075 in N/A 2.0 in N/A .125 in N/A Cold Rolled Steel N/A Steel
LJH1035-S N/A
100288
N/A 3.00 in N/A G N/A 0.075 in N/A 2.0 in N/A 0.187 in N/A Cold Rolled Steel N/A Steel
LJH1039-S N/A
100289
N/A 4.00 in N/A G N/A 0.075 in N/A 3.00 in N/A 0.187 in N/A Cold Rolled Steel N/A Steel
LJH1010-S N/A
100290
N/A 2.50 in N/A G N/A 0.09 in N/A 2.0 in N/A 0.187 in N/A Cold Rolled Steel N/A Steel
LJH1018-S N/A
100291
N/A 3.00 in N/A G N/A 0.09 in N/A 3.00 in N/A 0.25 in N/A Cold Rolled Steel N/A Steel
LJH1018-S N/A
100292
N/A 3.00 in N/A G N/A 0.09 in N/A 3.00 in N/A 0.25 in N/A Cold Rolled Steel N/A Steel
LJH1023-S N/A
100293
N/A 4.00 in N/A G N/A 0.09 in N/A 3.00 in N/A 0.25 in N/A Cold Rolled Steel N/A Steel
LJH1002-S N/A
100294
N/A 4.00 in N/A G N/A 0.120 in N/A 3.00 in N/A 0.25 in N/A Cold Rolled Steel N/A Steel
LJH1006-S N/A
100295
N/A 4.00 in N/A G N/A 0.120 in N/A 4.0 in N/A 0.25 in N/A Cold Rolled Steel N/A Steel
LJH1067-S N/A
100296
N/A 2.00 in N/A G N/A 0.048 in N/A 1.25 in N/A .125 in N/A Cold Rolled Steel N/A Steel
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1