QUESTIONS? TALK TO A SALES ENGINEER:
CALL (877) 740-1077 OR CHAT LIVE.

Sales@askmonroe.com | Locations Worldwide

Loose Joint Hinges, variably referred to as slip, separable or take-apart hinges, have always been catalogued as right or left hand hinges. Because applications may vary, this has caused errors in in specification as to which is right or left hand. To simplify the selection of all loose joint hinges, we have identified each hinge by type and illustrated them in some detail. These hinges may be modified by hole piercing, swaging, forms and finishes. Refer to Special Hinge Guide. Other gauges, widths, lengths, and pin materials can be made to order.

This section contains the sizes and numbers of loose joint hinges which are considered standard and are usually carried in stock. These are surface type blank hinges without holes and less finish. They have spun or loose pins of similar material.

Other gauges, widths, lengths, and pin materials can be made to order. Prices based on quantity of order are available upon request. NO MINIMUM quantity required, any order acceptable.
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1 

Item #

Length

Type

Gauge

Open Width

Pin Diameter

Material/Type

Hinge Leaf Material

Hinge Pin Material

IntegrationID

LJH1065-S N/A 2.00 in N/A C N/A 0.048 in N/A 1.25 in N/A .125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100161
LJH1069-S N/A 2.00 in N/A C N/A 0.048 in N/A 1.50 in N/A .125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100162
LJH1077-S N/A 3.00 in N/A C N/A 0.048 in N/A 2.0 in N/A .125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100163
LJH1073-S N/A 2.50 in N/A C N/A 0.048 in N/A 1.50 in N/A .125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100164
LJH1041-S N/A 1.50 in N/A C N/A 0.06 in N/A 1.00 in N/A .125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100165
LJH1045-S N/A 2.00 in N/A C N/A 0.06 in N/A 1.25 in N/A .125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100166
LJH1049-S N/A 2.00 in N/A C N/A 0.06 in N/A 1.50 in N/A .125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100167
LJH1053-S N/A 2.00 in N/A C N/A 0.06 in N/A 2.0 in N/A .125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100168
LJH1057-S N/A 2.50 in N/A C N/A 0.06 in N/A 2.0 in N/A .125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100169
LJH1061-S N/A 3.00 in N/A C N/A 0.06 in N/A 2.0 in N/A .125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100170
LJH1025-S N/A 2.00 in N/A C N/A 0.075 in N/A 1.50 in N/A .125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100171
LJH1029-S N/A 2.50 in N/A C N/A 0.075 in N/A 2.0 in N/A .125 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100172
LJH1033-S N/A 3.00 in N/A C N/A 0.075 in N/A 2.0 in N/A 0.187 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100173
LJH1037-S N/A 4.00 in N/A C N/A 0.075 in N/A 3.00 in N/A 0.187 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100174
LJH1008-S N/A 2.50 in N/A C N/A 0.09 in N/A 2.0 in N/A 0.187 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100175
LJH1012-S N/A 3.00 in N/A C N/A 0.09 in N/A 2.0 in N/A 0.187 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100176
LJH1016-S N/A 3.00 in N/A C N/A 0.09 in N/A 3.00 in N/A 0.25 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100177
LJH1021-S N/A 4.00 in N/A C N/A 0.09 in N/A 3.00 in N/A 0.25 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100178
LJH1000-S N/A 4.00 in N/A C N/A 0.120 in N/A 3.00 in N/A 0.25 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100179
LJH1004-S N/A 4.00 in N/A C N/A 0.120 in N/A 4.0 in N/A 0.25 in N/A Flag Type N/A Cold Rolled Steel N/A Steel N/A
100180
1 - 20 of 20 | Results Per Page | View | Unit of Measure
1