QUESTIONS? TALK TO A SALES ENGINEER:
CALL (877) 740-1077 OR CHAT LIVE.

Sales@askmonroe.com | Locations Worldwide

Loose Joint Hinges, variably referred to as slip, separable or take-apart hinges, have always been catalogued as right or left hand hinges. Because applications may vary, this has caused errors in in specification as to which is right or left hand. To simplify the selection of all loose joint hinges, we have identified each hinge by type and illustrated them in some detail. These hinges may be modified by hole piercing, swaging, forms and finishes. Refer to Special Hinge Guide. Other gauges, widths, lengths, and pin materials can be made to order.

This section contains the sizes and numbers of loose joint hinges which are considered standard and are usually carried in stock. These are surface type blank hinges without holes and less finish. They have spun or loose pins of similar material.

Other gauges, widths, lengths, and pin materials can be made to order. Prices based on quantity of order are available upon request. NO MINIMUM quantity required, any order acceptable.
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

IntegrationID

Length

Type

Gauge

Open Width

Pin Diameter

Material/Type

Hinge Leaf Material

Hinge Pin Material

LJH1212-SS N/A
100259
N/A 2.00 in N/A B N/A 0.06 in N/A 1.50 in N/A .125 in N/A Plain Surface Type N/A Stainless Steel - 304-2B N/A 303/304 Cold Finish
LJH1208-SS N/A
100260
N/A 2.00 in N/A B N/A 0.075 in N/A 1.50 in N/A 0.187 in N/A Plain Surface Type N/A Stainless Steel - 304-2B N/A 303/304 Cold Finish
LJH1210-SS N/A
100261
N/A 2.50 in N/A B N/A 0.075 in N/A 2.5 in N/A 0.187 in N/A Plain Surface Type N/A Stainless Steel - 304-2B N/A 303/304 Cold Finish
LJH1204-SS N/A
100262
N/A 2.00 in N/A B N/A 0.09 in N/A 1.50 in N/A 0.187 in N/A Plain Surface Type N/A Stainless Steel - 304-2B N/A 303/304 Cold Finish
LJH1206-SS N/A
100263
N/A 3.00 in N/A B N/A 0.09 in N/A 2.0 in N/A 0.25 in N/A Plain Surface Type N/A Stainless Steel - 304-2B N/A 303/304 Cold Finish
LJH1202-SS N/A
100264
N/A 4.00 in N/A B N/A 0.120 in N/A 4.0 in N/A 0.25 in N/A Plain Surface Type N/A Stainless Steel - 304-2B N/A 303/304 Cold Finish
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1