The Long-Lok thread lock provides additional resistance to vibration. The resilient nylon insert is squeezed like a wedge between the thread of the plunger and fastening component, providing extreme high loosening torque. The Long-Loc thread lock does not require initial tension or and defined position so that it is secured in every position. All plungers are pressure and function tested.
1 - 14 of 14 | Results Per Page | View | Unit of Measure
1 
Clear Filter

A - Thread

B - Body Length (mm)

C - Ball Projection (mm)

D - Ball Diameter (mm)

End Pressure Initial-Final

Item #

CAD

IntegrationID

Thread

Body Length

Ball Height

Ball Diameter

End Pressure Initial-Final

N/A N/A
99590
N/A M3 N/A 7.00 mm N/A 0.50 mm N/A 1.50 mm N/A 1.50 to 3.00 (N)
N/A N/A
99591
N/A M4 N/A 9.00 mm N/A 0.80 mm N/A 2.50 mm N/A 4.00 to 10.00 (N)
N/A N/A
99592
N/A M5 N/A 12.00 mm N/A 0.90 mm N/A 3.00 mm N/A 6.00 to 11.00 (N)
N/A N/A
99593
N/A M6 N/A 14.00 mm N/A 1.00 mm N/A 3.50 mm N/A 9.00 to 13.00 (N)
N/A N/A
99594
N/A M8 N/A 16.00 mm N/A 1.50 mm N/A 5.00 mm N/A 15.00 to 30.00 (N)
N/A N/A
99595
N/A M10 N/A 19.00 mm N/A 2.00 mm N/A 6.00 mm N/A 20.00 to 35.00 (N)
N/A N/A
99596
N/A M12 N/A 22.00 mm N/A 2.50 mm N/A 8.00 mm N/A 30.00 to 55.00 (N)
N/A N/A
99597
N/A M16 N/A 24.00 mm N/A 3.50 mm N/A 10.0 mm N/A 65.00 to 125.00 (N)
N/A N/A
99628
N/A M5 N/A 12.00 mm N/A 0.90 mm N/A 3.00 mm N/A 19.00 to 30.00 (N)
N/A N/A
99629
N/A M6 N/A 14.00 mm N/A 1.00 mm N/A 3.50 mm N/A 28.00 to 40.00 (N)
N/A N/A
99630
N/A M8 N/A 16.00 mm N/A 1.50 mm N/A 5.00 mm N/A 47.00 to 73.00 (N)
N/A N/A
99631
N/A M10 N/A 19.00 mm N/A 2.00 mm N/A 6.00 mm N/A 66.00 to 100.00 (N)
N/A N/A
99632
N/A M12 N/A 22.00 mm N/A 2.50 mm N/A 8.00 mm N/A 66.00 to 120.00 (N)
N/A N/A
99633
N/A M16 N/A 24.00 mm N/A 3.50 mm N/A 10.0 mm N/A 90.00 to 180.00 (N)
1 - 14 of 14 | Results Per Page | View | Unit of Measure
1