High impact strength special technopolymer in black color with matte finish surfaces. Resistant to solvents, oil, greases and other chemical agents. AISI 303 stainless steel rotation stud pin.

Rotation angle: max 190°, between 0° and -70° and between 0° and 120° (0° = where the two interconnected surfaces are on the same plane). Do not exceed the rotation angle limit so as not to prejudice the hinges mechanical performance (see drawing).

This model has been conceived for doors with gaskets.

ELESA Original Design

Fitting by means of:
  • 2 pairs of nickel-plated brass bushings with tapped hole
  • 2 pairs of nickel-plated brass studs
  • 2 pairs of through holes for cylindrical head screws
  • 1 pair of nickel-plated brass bushings with tapped hole and 1 pair of nickel-plated brass studs
  • 1 pair of nickel-plated brass bushings with tapped hole and 1 pair of through holes for cylindrical head screws
  • 1 pair of nickel-plated brass studs and 1 pair of through holes for cylindrical head screws

Rotation angle: max 190°, between 0° and -70° and between 0° and 120° (0° = where the two interconnected surfaces are on the same plane). Do not exceed the rotation angle limit so as not to prejudice the hinges mechanical performance (see drawing).

This model has been conceived for doors with gaskets.

ELESA Original Design.

1 - 24 of 24 | Results Per Page | View | Unit of Measure
1 

Item #

IntegrationID

d1

H

Open Width - B

b1

Center to Center (f ±0.25)

Center to Center (f1 ±0.25)

h1

L - Length

Through Holes - d3

Through Holes - d5

ME423111 N/A
5090
N/A 2.50 mm N/A 12.50 mm N/A 45.50 mm N/A 15.00 mm N/A 15.00 mm N/A 30.00 mm N/A 9.50 mm N/A 30.50 mm N/A N/A
ME423121 N/A
5091
N/A 2.50 mm N/A 12.50 mm N/A 45.50 mm N/A 15.00 mm N/A 15.00 mm N/A 30.00 mm N/A 9.50 mm N/A 30.50 mm N/A N/A
ME423131 N/A
5092
N/A 2.50 mm N/A 12.50 mm N/A 45.50 mm N/A 15.00 mm N/A 15.00 mm N/A 30.00 mm N/A 9.50 mm N/A 30.50 mm N/A 3.50 mm N/A 6.00 mm
ME423141 N/A
5093
N/A 2.50 mm N/A 12.50 mm N/A 45.50 mm N/A 15.00 mm N/A 15.00 mm N/A 30.00 mm N/A 9.50 mm N/A 30.50 mm N/A N/A
ME423151 N/A
5094
N/A 2.50 mm N/A 12.50 mm N/A 45.50 mm N/A 15.00 mm N/A 15.00 mm N/A 30.00 mm N/A 9.50 mm N/A 30.50 mm N/A 3.50 mm N/A 6.00 mm
ME423161 N/A
5095
N/A 2.50 mm N/A 12.50 mm N/A 45.50 mm N/A 15.00 mm N/A 15.00 mm N/A 30.00 mm N/A 9.50 mm N/A 30.50 mm N/A 3.50 mm N/A 6.00 mm
ME423211 N/A
5096
N/A 4.00 mm N/A 16.50 mm N/A 59.00 mm N/A 20.00 mm N/A 20.00 mm N/A 40.40 mm N/A 12.50 mm N/A 40.50 mm N/A N/A
ME423221 N/A
5097
N/A 4.00 mm N/A 16.50 mm N/A 59.00 mm N/A 20.00 mm N/A 20.00 mm N/A 40.40 mm N/A 12.50 mm N/A 40.50 mm N/A N/A
ME423231 N/A
5098
N/A 4.00 mm N/A 16.50 mm N/A 59.00 mm N/A 20.00 mm N/A 20.00 mm N/A 40.40 mm N/A 12.50 mm N/A 40.50 mm N/A 4.50 mm N/A 7.50 mm
ME423241 N/A
5099
N/A 4.00 mm N/A 16.50 mm N/A 59.00 mm N/A 20.00 mm N/A 20.00 mm N/A 40.40 mm N/A 12.50 mm N/A 40.50 mm N/A N/A
ME423251 N/A
5100
N/A 4.00 mm N/A 16.50 mm N/A 59.00 mm N/A 20.00 mm N/A 20.00 mm N/A 40.40 mm N/A 12.50 mm N/A 40.50 mm N/A 4.50 mm N/A 7.50 mm
ME423261 N/A
5101
N/A 4.00 mm N/A 16.50 mm N/A 59.00 mm N/A 20.00 mm N/A 20.00 mm N/A 40.40 mm N/A 12.50 mm N/A 40.50 mm N/A 4.50 mm N/A 7.50 mm
ME423311 N/A
5102
N/A 5.00 mm N/A 20.00 mm N/A 70.00 mm N/A 24.00 mm N/A 24.00 mm N/A 46.00 mm N/A 15.00 mm N/A 48.50 mm N/A N/A
ME423321 N/A
5103
N/A 5.00 mm N/A 20.00 mm N/A 70.00 mm N/A 24.00 mm N/A 24.00 mm N/A 46.00 mm N/A 15.00 mm N/A 48.50 mm N/A N/A
ME423331 N/A
5104
N/A 5.00 mm N/A 20.00 mm N/A 70.00 mm N/A 24.00 mm N/A 24.00 mm N/A 46.00 mm N/A 15.00 mm N/A 48.50 mm N/A 5.50 mm N/A 9.00 mm
ME423341 N/A
5105
N/A 5.00 mm N/A 20.00 mm N/A 70.00 mm N/A 24.00 mm N/A 24.00 mm N/A 46.00 mm N/A 15.00 mm N/A 48.50 mm N/A N/A
ME423351 N/A
5106
N/A 5.00 mm N/A 20.00 mm N/A 70.00 mm N/A 24.00 mm N/A 24.00 mm N/A 46.00 mm N/A 15.00 mm N/A 48.50 mm N/A 5.50 mm N/A 9.00 mm
ME423361 N/A
5107
N/A 5.00 mm N/A 20.00 mm N/A 70.00 mm N/A 24.00 mm N/A 24.00 mm N/A 46.00 mm N/A 15.00 mm N/A 48.50 mm N/A 5.50 mm N/A 9.00 mm
ME423411 N/A
5108
N/A 6.00 mm N/A 27.50 mm N/A 97.00 mm N/A 33.00 mm N/A 33.00 mm N/A 63.70 mm N/A 21.00 mm N/A 66.00 mm N/A N/A
ME423421 N/A
5109
N/A 6.00 mm N/A 27.50 mm N/A 97.00 mm N/A 33.00 mm N/A 33.00 mm N/A 63.70 mm N/A 21.00 mm N/A 66.00 mm N/A N/A
ME423431 N/A
5110
N/A 6.00 mm N/A 27.50 mm N/A 97.00 mm N/A 33.00 mm N/A 33.00 mm N/A 63.70 mm N/A 21.00 mm N/A 66.00 mm N/A 6.50 mm N/A 10.50 mm
ME423441 N/A
5111
N/A 6.00 mm N/A 27.50 mm N/A 97.00 mm N/A 33.00 mm N/A 33.00 mm N/A 63.70 mm N/A 21.00 mm N/A 66.00 mm N/A N/A
ME423451 N/A
5112
N/A 6.00 mm N/A 27.50 mm N/A 97.00 mm N/A 33.00 mm N/A 33.00 mm N/A 63.70 mm N/A 21.00 mm N/A 66.00 mm N/A 6.50 mm N/A 10.50 mm
ME423461 N/A
5113
N/A 6.00 mm N/A 27.50 mm N/A 97.00 mm N/A 33.00 mm N/A 33.00 mm N/A 63.70 mm N/A 21.00 mm N/A 66.00 mm N/A 6.50 mm N/A 10.50 mm
1 - 24 of 24 | Results Per Page | View | Unit of Measure
1 

Are you looking for a quote?

Learn More

Experience

Over 60 years of manufacturing experience to best server our customers

Read More >>

Capabilities

Monroe provides custom manufacturing solutions to clients throughout the world

Read More >>

Values

Our knowledge, customer service & processes are structured to reduce delivery times, improve quality & cut costs

Read More >>

Quality

We are ISO 9001:2015 & AS9100D certified and have a customer base in many diverse industries

Read More >>