Material:

  • Steel version, locking pin hardened: quality class 5.8
  • Stainless steel version, locking pin hardened: threaded sleeve 1.4305 locking pin 1.4034
  • Stainless steel version, locking pin not hardened: threaded sleeve 1.4305 locking pin 1.4305

    Key ring 1.4310, natural finish

    Surface finish:

  • Steel version, locking pin hardened: black oxide finish, locking pin ground
  • Stainless steel version, locking pin hardened: natural finish, locking pin ground
  • Stainless steel version, locking pin not hardened: natural finish, locking pin ground

    Note:
    Indexing Plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been disengaged.The key ring is also suitable for actuation of the locking bolt, for example automatically (programme-controlled) with the aid of a pneumatic cylinder or actuation by remote control with bowden cables.

    On request:
    Special versions and spacer rings.

    (Kipp Original Design)
  • 1 - 10 of 10 | Results Per Page | View | Unit of Measure
    1 

    Item #

    IntegrationID

    Material

    Style

    D

    H

    D4

    L2

    L1

    D1

    F x 30°

    L4

    SW1

    SW2

    N/A
    78042
    N/A Steel N/A R N/A 4.00 mm N/A 4.00 mm N/A 15.00 mm N/A 6.00 mm N/A 15.00 mm N/A M8 X 1.00 mm N/A 1.00 mm N/A 13.00 mm N/A 10.00 mm N/A
    N/A
    78043
    N/A Steel N/A R N/A 5.00 mm N/A 5.00 mm N/A 23.00 mm N/A 7.00 mm N/A 17.00 mm N/A M10 X 1.00 mm N/A 1.30 mm N/A 15.00 mm N/A 13.00 mm N/A
    N/A
    78044
    N/A Steel N/A R N/A 6.00 mm N/A 6.00 mm N/A 23.00 mm N/A 8.00 mm N/A 20.00 mm N/A M12 X 1.50 mm N/A 1.80 mm N/A 17.00 mm N/A 14.00 mm N/A
    N/A
    78045
    N/A Steel N/A R N/A 8.00 mm N/A 8.00 mm N/A 28.00 mm N/A 10.00 mm N/A 26.00 mm N/A M16 X 1.50 mm N/A 2.30 mm N/A 23.00 mm N/A 19.00 mm N/A
    N/A
    78046
    N/A Steel N/A R N/A 10.00 mm N/A 10 mm N/A 28.00 mm N/A 12.00 mm N/A 28.00 mm N/A M20 X 1.50 mm N/A 2.80 mm N/A 25.00 mm N/A 22.00 mm N/A
    N/A
    78047
    N/A Steel N/A S N/A 4.00 mm N/A 4.00 mm N/A 15.00 mm N/A 6.00 mm N/A 15.00 mm N/A M8 X 1.00 mm N/A 1.00 mm N/A 13.00 mm N/A 10.00 mm N/A 13.00 mm
    N/A
    78048
    N/A Steel N/A S N/A 5.00 mm N/A 5.00 mm N/A 23.00 mm N/A 7.00 mm N/A 17.00 mm N/A M10 X 1.00 mm N/A 1.30 mm N/A 15.00 mm N/A 13.00 mm N/A 17.00 mm
    N/A
    78049
    N/A Steel N/A S N/A 6.00 mm N/A 6.00 mm N/A 23.00 mm N/A 8.00 mm N/A 20.00 mm N/A M12 X 1.50 mm N/A 1.80 mm N/A 17.00 mm N/A 14.00 mm N/A 19.00 mm
    N/A
    78050
    N/A Steel N/A S N/A 8.00 mm N/A 8.00 mm N/A 28.00 mm N/A 10.00 mm N/A 26.00 mm N/A M16 X 1.50 mm N/A 2.30 mm N/A 23.00 mm N/A 19.00 mm N/A 24.00 mm
    N/A
    78051
    N/A Steel N/A S N/A 10.00 mm N/A 10 mm N/A 28.00 mm N/A 12.00 mm N/A 28.00 mm N/A M20 X 1.50 mm N/A 2.80 mm N/A 25.00 mm N/A 22.00 mm N/A 30.00 mm
    1 - 10 of 10 | Results Per Page | View | Unit of Measure
    1