Mechanical Extension Springs are coiled products, in a variety of materials and forms. Extension springs are attached to two components from both ends of the spring, and when the components pull apart, the spring tries to pull the components together again. Extension Springs are wound to oppose extension.

Dependant on the application's load requirements, the springs initial tension can be manipulated. They are often tightly wound in the no-load position and have hooks, eyes, or spring anchors at the ends to attach to the components. Each spring is designed within proper stress levels and manufacturing limits.

Unit of Measure

Weight

N/A 0.000143 pounds

Material

N/A 302 Stainless Steel per ASTM-A313 or AMS-5688

Height

N/A 0.44 inches

Depth

N/A 0.094 inches

Width

N/A 0.094 inches

Application & Uses

N/A Cable Return, Balance, Belt Tensioner, etc.

Features/Advantages/Benefits

N/A Standard Part, Corrosion Resistant

Country of Origin

N/A US

Outside Dia (In.)

N/A 0.094 inches

Wire Dia (In.)

N/A 0.012 inches

Free Length (In.)

N/A 0.44 inches

Spring Rate (lbs./In.)

N/A 2.0 lbs/in

Initial Tension (lbs)

N/A 0.08 pounds

Ends

N/A Full Twist Loop

Warning

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.