Ideal for lifting steel plate, forgings, die casting and of similar items! Creative Lift® Magnets are the proven solution to simplified machine loading and unloading, for handling steel items in receiving and shipping areas and for the fast stacking, de-stacking and transfer of steel sheets, plates, bar stock, angles and rounds. One person can perform operations previously calling for two or more people.CONFORMS TO ASME B30.20 STANDARDS

Features

  • Less torque required to release part
  • Lift capacity clearly stated on magnet. (do not exceed this)
  • No Electrical power required for operation
  • Durable stainless steel casing. (will not rust or corrode)
  • Use only on thick, non-flexing ferrous items


Note: Never stand under load being lifted. Always use extra caution. Only use lifting magnets on material that does not flex or bend. The surface of the lift, and the load being lifted, need to be clean and free of chips, oil, slag, dirt, etc. Lifting magnets must be centered on load. Not recommended for painted or finish coated surfaces.

Did you want to learn more about Magnets? Give us a call or take a look at our magnet guides.

Unit of Measure

Magnet Length

N/A 15.25 in

Magnet Height

N/A 2.25 in

Overall Width

N/A 10.50 in

Overall Length

N/A 19.25 in

Shipping Weight

N/A 92 lb

Holding Value (Flat Items)

N/A 3000 lb

Country of Origin

N/A US

Warning

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.

Product Guide

N/A Magnet's Guides