Wave spring washers are normally used in thrust-loading applications for small deflections, particularly where radial space is limited. A typical example is the axial loading of ball bearings. The spring rate is approximately linear between 20% and 80% of available deflection.Certificate of compliance available upon request - Certificate of chemical analysis available at extra cost.

Stainless Steel - Commercial Type 302 & Government AMS 5906 (Chemical only) - Type 302

High Carbon Steel - Commercial 1074-1095– Certified to ASTM-A684 & Commercial 1074– Certified to ASTM-A684

Finish - Washers are carried in stock in plain finish suitable for various types of finishes: either electroplated or mechanically plated (a process which reduces the possibility of hydrogen embrittlement). Please call us for recommendations on special or specific applications.

Unit of Measure

Weight

N/A 0.000107 pounds

Material

N/A 302 Stainless Steel (Commercial) AMS 5906 (Chemical)

Height

N/A 0.367 inches

Depth

N/A 0.030 inches

Width

N/A 0.030 inches

Country of Origin

N/A US

Thickness (In.)

N/A 0.0060 Inch

Free Height (Approx) (In.)

N/A 0.030 Inch

Nominal Spring Rate (lbs/In.)

N/A 200 lbs/in

Inside Diameter (In.)

N/A 0.265 Inch

Outside Diameter (In.)

N/A 0.367 Inch

# of Waves

N/A 3

Warning

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.