Item # CP1008, Brauer CAM Push/CAM Pull Clamps on Monroe PMP

Adjustable Handles Casters Crank Handles Fasteners Fine Adjusters Handles Handwheels Hinges Hoists Rings Hooks Hooks/Shackles Hydraulic Clamping Indicators Knobs Leveling Mounts Lever Arms Locks Magnetic Catches Magnets Military Spec Hinges Plungers Pull Handles Quick Release Pins Toggle Clamps Workholding

Ph:
Fax: 800-453-9683

Hours of Operation:
8am - 7pm EST
1030 Doris Rd.
Auburn Hills, MI 48326

All Categories > Clamping Products (Toggle Clamps) > Brauer Brand Toggle Clamps > Brauer Pull Back Clamps > Pull Back Toggle Clamps > Brauer CAM Push/CAM Pull Clamps > Item # CP1008

Download PDF

Printable Page Email

Email This Page

Save To Favorites


	Item # CP1008, Brauer CAM Push/CAM Pull Clamps

Download PDF

Email This Page

Save To Favorites

1101 lbs nominal holding force
Features: These clamps are offered in four configurations- push action or pull action in either right or left hand rotation. The cam gives 3/8" of fast travel to approach the work-piece, and a maximum of 5/64' clamping stroke.
The mechanism is totally enclosed to avoid finger traps and the ingress of dirt or metal cuttings.
Specification: All external parts are finished semi-black except the knob which is dull red plastic. The cam roller and the cam faces are case hardened to minimize wear.
Installation: It is essential that the clamps are installed to clamp on the 'clamping stroke'. Clamping on the 'fast travel' part of the stroke can result in the clamp releasing itself, and allowing the clamp to reach the end of its 'clamping stroke' does not ensure secure clamping.
Hand force only should be used in closing the clamps as over tightening with a hammer of lever can result in damage to the unit.

larger image

larger image

Unit of Measure: Imperial | Metric | Both

Specifications

Type		Push and Pull

Operation		Cam operated. Left hand pull. Rear mounted.

Item # CP1008, Brauer CAM Push/CAM Pull Clamps

Type

Operation